Read LG WT-80PV Service Manual online
Introduction of each operation button
AIR DRY
TIME LEFT, DELAY, ALARM INDICATION
●
Air Dry: improve the dehydration performance,
prevent the mold caused by moist air.。
●
During "Air Dry", only "START/PAUSE",
"PROGRAM" and "POWER" button are
available.
available.
●
“AIR DRY” will go on till the power is off
●
Time left-During operation, the remaining time is
indicated。
●
●
T
R
A
T
S
Y
A
L
E
D
INDICATION(RESERVATION)-When
DELAY
START(RESERVATION) program is selected, it
indicates the finishing time。
●
indicates the finishing time。
●
Alarm indication-When an error occurs, an error
message appears to indicate the abnormality. For
example,
example,
indicates that the lid is open。
STREAM
●
The stream strength can be
adjusted manually with a
cycle
cycle
of
medium→strong→weak
according to requirements.
according to requirements.
WATER LEVEL
WASH
RINSE
CHILD LOCK
●Use to adjust washing
time.
●
Washing time can be
adjusted
manually
according
to
requirements and the
time is increasing
with certain sequence
as the button is
pushed.
time is increasing
with certain sequence
as the button is
pushed.
●
Press
"START/PAUSE"
button
button
before
adjusting
the
"WASH" program.
●
Press “RINSE" button to
adjust rinsing times.
●
The rinsing times can be
adjusted
manually
according to requirements
and are no more than
five.[1→2→3→4→5→off
→
and are no more than
five.[1→2→3→4→5→off
→
1]
●
Use to lock or unlock the
control buttons to prevent
settings
settings
from
being
changed by a child。
●
To lock, push the RINSE
and
SPIN
buttons
simultaneously for 3
seconds。
seconds。
●
“CHILD
LOCK”
is
activated with sound
“DINGDING” and screen
displays
“DINGDING” and screen
displays
every
2 seconds. During the
“CHILD LOCK”, all the
buttons
“CHILD LOCK”, all the
buttons
are
locked
including “POWER”.
●
If you want to unlock
during wash, press both
“WASH”
“WASH”
and
“SPIN”
button
simultaneously
again.
Notice:
1. Because of automatically optimization of the micro-processor, the display time may change. The increase and
decrease of the old time should not exceed 8 minutes and 4 minutes respectively.
2.
The standard that compared with sensor result is set up according to the normal standard, which may not
conform to some specific users.
3.
The detergent amount sensor is designed according to the synthetic detergent. If you add liquid detergent,
soap powder or overdose bleach, sensor sensitivity will degrade.
5
1
Click on the first or last page to see other WT-80PV service manuals if exist.