Read LG WP-95162D Service Manual online
4. DISASSEMBLY INSTRUCTIONS
Before attempting to service or adjust any
part of the washing machine, disconnect the
electrical power supply from the wall outlet.
NOTE
4-1. Panel Assembly replacement
Remove the screws fastening the back cover and
remove the back cover(Fig. 1).
remove the back cover(Fig. 1).
1.
Remove the vinyl tape fastening the lead wires
closed connector to the plunger valve assembly and
disconnect the lead wires (Fig. 2).
closed connector to the plunger valve assembly and
disconnect the lead wires (Fig. 2).
2.
Disconnect the plunger valve strap from the plunger
valve rod(Fig. 3).
valve rod(Fig. 3).
3.
Remove the screws fastening the panel(Fig. 4).
4.
Lift up the panel assembly and lay it down on the
top(Fig. 5).
top(Fig. 5).
5.
To assemble the panel assembly, reverse the
disassembly procedure.
disassembly procedure.
When replacing the panel assembly, fix the
plunger valve strap properly.
plunger valve strap properly.
Securely solder connecting lead wires, or
used connectors and insulate well to
prevent overheating.
used connectors and insulate well to
prevent overheating.
Water supply system replacement
Pull out the knobs(Fig. 6)
1.
Pull out the supply select hose from the supply
select guide(Fig. 7).
select guide(Fig. 7).
2.
Push the supply selector guide in the direction of
the arrow(Fig. 8).
the arrow(Fig. 8).
4.
Remove the switch body from the panel.
3.
To assemble the water supply system to the switch
body, reverse the above disassembly procedure.
body, reverse the above disassembly procedure.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 8
Fig. 7
Fig. 6
Fig. 5
NOTE
-6-
Plunger Valve Strap
Supply select guide
Click on the first or last page to see other WP-95162D service manuals if exist.