Read LG WP-8204PT Service Manual online
-8-
SD-COVER
SAFETY
COVER-1
COVER-1
1
2
3
4-3. SPIN DRYER COVER
ASSEMBLY REPLACEMENT
After removing the panel assembly, proceed as follows :
(1) Open the spin dryer cover and remove the brake
wire assembly from the brake wire supporter by
pulling the wire tube in the direction of the arrow.
(fig.12)
pulling the wire tube in the direction of the arrow.
(fig.12)
1
2
Fig.12
(2) Take out the wire end of the brake wire assembly
from the brake wire hanger and remove the brake
wire hanger. (fig.13)
wire hanger. (fig.13)
Fig.13
(3) Remove the Q-Spring from the spin dryer cover.
(4) Unscrew and remove the screws fastening the spin
(4) Unscrew and remove the screws fastening the spin
dryer cover assembly. (fig.14)
Fig.14
(5) Remove the spin dryer cover assembly from the tub.
(6) Push the center part ( ) of safety cover-1 and pull
(6) Push the center part ( ) of safety cover-1 and pull
the spin dryer cover to outside ( ) to disassemble
spin dryer cover asembly. (fig.15)
spin dryer cover asembly. (fig.15)
To assemble the spin dryer cover assembly, reverse
the disassembly procedure.
the disassembly procedure.
4-4. SPIN DRYER BASKET
ASSEMBLY REPLACEMENT
After removing the back cover, proceed as follows:
(1) Open the spin dryer cover and the safety cover-2
and pull off the safety cover-1 from the tub. (fig.16)
Fig.15
(2) Loosen the bolt of the coupling assembly fastening
the spin shaft. (fig.17)
Fig.17
(3) Pull out the spin dryer basket assembly. (fig.18)
Fig.18
Fig.16
Wire end
To assemble the spin dryer baskbet assembly,
reverse the disassembly procedure.
reverse the disassembly procedure.
WP 830
29/8/04, 10:51 PM
8
Click on the first or last page to see other WP-8204PT service manuals if exist.