Read LG WP-750RG Service Manual online
11
4-7. Washing Tub(cabinet), the
Top cover, replacement
After removing the panel assembly, the safety cover
assembly, the spin dryer basket assembly, the spin dryer
cover, the washing cover, the Q-spring, top cover assembly,
v-belt the door switch and the back cover, proceed as follows:
assembly, the spin dryer basket assembly, the spin dryer
cover, the washing cover, the Q-spring, top cover assembly,
v-belt the door switch and the back cover, proceed as follows:
1. Lay the front side on a blanket or cardborad.
4-8. P. Shaft Assembly
(Gear Case Assembly)
replacement
replacement
After removing the back cover and opening the washing
cover, proceed as follows:
cover, proceed as follows:
1. Loosen the pulsator fixing screw and pull up the
pulsator(Fig. 36).
2. Disconnect the drain hose or the drain hose-D
(Pump model).
3. Remove the screws washing Tub(cabinet) (Fig. 35).
3. Unscrew and remove the screws fastening the
base and remove the base from the cabinet.
4. Lay the washing machine on its front side on a
blanket or some cardboard and remove the base
(Fig. 38).
(Fig. 38).
To assemble the washing Tup(cabinet), reverse the
disassembly procedure.
disassembly procedure.
NOTE
Apply adhesive on hose joint to prevent
water leaks.
water leaks.
Fig. 34
Fig. 35
Fig. 36
Fig. 37
Fig. 38
Click on the first or last page to see other WP-750RG service manuals if exist.