Read LG WP-25P1 Service Manual online
-15-
Trouble
Cause
Repair Method
Spin Drying
While spining, spin dryer basket
is unbalanced.
is unbalanced.
Spining operation is not proper.
After opening spin dryer cover, spin
dryer basket continues revolving.
dryer basket continues revolving.
Installation is unbalanced.
Installed area is not level.
Installed area is not level.
Load in spin dryer basket is
unbalanced.
unbalanced.
Bellows assembly is damaged.
Center between spin shaft and
coupling is unbalanced.
coupling is unbalanced.
Brake is defective.
Spin shaft is clogged.
Drain hose is clogged.
Bearing for bellows assembly is worn.
Brake is defective.
Vent is turned over or is not secure.
(WP-570NP/WP-580NP)
Vent is faulty. (WP-570NP/WP-580NP)
Advise the customer to install the
washing machine in a more stable
location.
washing machine in a more stable
location.
Re-distribute the load.
Advise the customer of correct loading.
Advise the customer of correct loading.
Replace with a new one.
Balance completely.
Adjust brake properly.
Remove blockage.
Remove blockage.
Replace with a new one.
Adjust brake properly.
Secure properly.
Replace with a new one.
Others
No draining
Drain pump does not operate
(WP-570NP/WP-580NP)
(WP-570NP/WP-580NP)
When draining water, water
does not flow out smoothly.
does not flow out smoothly.
Noise
Valve selector position is defective
or is not correct.
or is not correct.
Strap connection is defective.
Lint sticks to the filter or hoses.
Valve selector position is defective
or is not correct.
or is not correct.
Wiring is defective.
Mini switch is defective.
Drain pump interior(runner) is
clogged.
clogged.
Pump motor is defective.
Drain hose is clogged.
Lint is sticking to the plunger valve,
the filter or hoses.
the filter or hoses.
Blockage between the pulsator and
the tub.
the tub.
Bearing for pulsator shaft assembly
is worn.
is worn.
Bearing of bellows assembly is
worn.
worn.
Set valve selector to proper position.
Advise the customer.
Advise the customer.
Adjust properly.
Remove lint and clean.
Set valve selector to proper position.
Advise the customer.
Advise the customer.
Rewire properly.
Replace with a new one.
Remove blockage.
Replace with a new one.
Remove blockage.
Remove lint and clean.
Remove blockage.
Replace with a new pulsator shaft
assembly.
assembly.
Replace with bellows assembly.
Click on the first or last page to see other WP-25P1 service manuals if exist.