Read LG WP-25P1 Service Manual online
-14-
7. TROUBLESHOOTING GUIDE
Trouble
Cause
Repair Method
Power Supply
Power cord is not plugged into the
wall outlet firmly.
Power is not supplied at the wall
outlet.
Connect firmly.
Advise the customer.
Advise the customer.
Replace fuse or reset circuit breaker.
Advise the customer.
Advise the customer.
Spin Drying
After connecting to the power
source and turning on spin timer,
spin motor does not operate.
Plug or wiring is defective.
Spin timer is faulty.
Door switch is faulty.
Capacitor is defective.
Motor is defective.
Brake is defective.
Capacitor is defective.
Motor is defective.
Spin timer is faulty.
Door switch is faulty.
Capacitor is defective.
Motor is defective.
Brake is defective.
Capacitor is defective.
Motor is defective.
Repair and rewire properly.
Replace with a new one.
Adjust or replace with a new one.
Replace with a new one.
Replace with a new one.
Adjust brake properly.
Replace with a new one.
Replace with a new one.
Replace with a new one.
Adjust or replace with a new one.
Replace with a new one.
Replace with a new one.
Adjust brake properly.
Replace with a new one.
Replace with a new one.
Washing and Rinsing
After connecting to the power
source and turning wash timer,
wash motor does not operate.
After connecting to the power
source and turning wash timer,
wash motor does not operate
properly.(When wash motor makes
strange noise.)
Clothes do not swirl adequately
Amount of water decreases while
washing.
While rinsing, water overflows from
corner of the wash tub.
Plug or wiring is defective.
Wash timer is faulty.
Capacitor is defective.
Capacitor is defective.
Capacitor is defective.
Motor is defective.
Motor is defective.
Blockage between the pulsator and
Blockage between the pulsator and
the tub.
Excessive amount of clothes.
Valve selector position is not
Valve selector position is not
correct.
Strap connection is not adjusted properly.
Plunger valve bellows is damaged.
Too much water.
Lint is sticking to the plunger valve.
Plunger valve bellows is damaged.
Too much water.
Lint is sticking to the plunger valve.
Lint is sticking to the filter or hoses.
Drain pump does not operate.
Drain pump does not operate.
(WP-570NP/WP580NP)
Repair and rewire properly.
Replace with a new one.
Replace with a new one.
Replace with a new one.
Replace with a new one.
Replace with a new one.
Remove blockage.
Replace with a new one.
Replace with a new one.
Replace with a new one.
Replace with a new one.
Replace with a new one.
Remove blockage.
Reduce wash load.
Set valve selector to "WASH•RINSE" position.
Advise the customer.
Adjust properly.
Replace with a new one.
Adjust amount of water filled.
Separate plunger valve cover and
Replace with a new one.
Adjust amount of water filled.
Separate plunger valve cover and
clean the plunger valve.
Remove lint and clean.
See [Others]
Remove lint and clean.
See [Others]
Power is not supplied to
washing machine.
After connecting to the power
source and turning spin timer ON,
spin motor does not operate
properly. (When spin motor makes
strange noise.)
Click on the first or last page to see other WP-25P1 service manuals if exist.