Read LG WM0742HGA Service Manual online
22
VIBRATION & NOISE IN SPIN
Have all the transit bolts and base
packing been removed?
packing been removed?
Is the washer installed on a solidly
constructed floor?
constructed floor?
Move the washer or
reinforce the floor.
reinforce the floor.
Remove the transit bolts
and Base packing.
and Base packing.
YES
YES
NO
NO
Check if the washer is perfectly level as
follows:
follows:
Check the leveling of the washer with a
Level and check that the washer is stable.
Level and check that the washer is stable.
Put an unbalance part (rubber) inside of drum
and start QC test mode and run in high spin
(Refer to section 7-2).
When the machine is spinning in high speed,
verify that it is stable.
and start QC test mode and run in high spin
(Refer to section 7-2).
When the machine is spinning in high speed,
verify that it is stable.
If you do not have the unbalance part, put 4.5
to 6.5 lbs (2 to 3 kg) of clothing. Once loaded,
press power, Rinse+Spin and the start/pause
button in sequence.
When the machine is spinning in high speed,
verify that it is stable.
to 6.5 lbs (2 to 3 kg) of clothing. Once loaded,
press power, Rinse+Spin and the start/pause
button in sequence.
When the machine is spinning in high speed,
verify that it is stable.
If it is not stable, adjust feet accordingly. After
the washer is level, tighten the lock nuts up
against of the base of the washer. All lock nuts
must be tightened.
the washer is level, tighten the lock nuts up
against of the base of the washer. All lock nuts
must be tightened.
YES
Click on the first or last page to see other WM0742HGA service manuals if exist.