Read LG WFT8061DD Service Manual online
Push the pressing rod of water supply
hose when removing it.
hose when removing it.
Insert Water Supply Hose into down
connector and loosen pressing handle
during the Water Supply Hose
installation.
connector and loosen pressing handle
during the Water Supply Hose
installation.
Make sure pressing handle is in connector slot.
Check for water leakage
●
After connecting the hose, open the tap to check for any water leakage.
●
If the connection leaks, close the tap and start again from step 1. (For example, poor installation of
upper connector or upper and down connectors is not in tight with each other.)
●
Loose after long-time use。Close the tap and start again from step 1. (the same with moving house
or reinstalling water supply hose)
or reinstalling water supply hose)
5-3. Connecting Drain Hose
● Fit the end of the drain hose to the outlet of the
drain hose.
● Push the drain hose and fix it with clip.
● Check that the drain hose is hung up over the edge of
the laundry tub .
● Do not use an extension hose .
●Never lay down the drain hose ,as water will be
●Never lay down the drain hose ,as water will be
discharged
● Be sure the drain hose is properly routed so it will not
link or lift from the sink.
● The discharge height should be approximately
0.9~1.2m from the floor
● Install or store where it will not be exposed to sun，rain or winds
。
Caution
● Please use standard rated voltage.
13
Click on the first or last page to see other WFT8061DD service manuals if exist.