Read LG WFT8061DD Service Manual online
5-2. Connecting Water Supply Hose
●
Connecting Water Supply Hose to the machine
Check to see if there is a black rubber seal inside the
connector. If not, it would cause water-leakage.
Hose
Rubber seal
Inlet valve
Connect the water supply hose to inlet valve of the
washing machine vertically.
washing machine vertically.
Connect the water supply hose to inlet valve of the
washing machine, and then lock it by turning the hose
connecting part.
washing machine, and then lock it by turning the hose
connecting part.
●Connecting Water Supply Hose to water tap
Separate connector from the Water Supply Hose by
pulling the Pressing Rod and the Pressing Handle that
is attached to the Water Supply Hose.
●
pulling the Pressing Rod and the Pressing Handle that
is attached to the Water Supply Hose.
●
If the tap diameter is too large , remove the guide plate
inside。
Connector
Press
Press
Water
Untighten the 4 screws on the upper connector and
turning the down connector to leave space about 3
screws between the two connectors.
turning the down connector to leave space about 3
screws between the two connectors.
If the tap diameter is too large,
remove the guide plate inside.
Upper-con
Guide
3 screws
Down-con
11
Click on the first or last page to see other WFT8061DD service manuals if exist.