WFS1838EKD - LG Washing Machine Service Manual (repair manual). Page 17

• Use to set a delayed finishing

time. 

• The time increases when the

button is pushed.

• The following settings are

indicated as the button is pushed
3    4    5    ...11    12    14    16
...46    48    3 HOUR.

• To cancel delay time, turn the

power switch off.
(refer to page 24)

• Use for selecting wash program.
• This button allows you to  select 8

different programs for different kinds of
laundry and dirtiness.

• Program selections light up in sequence

as follows: FUZZY(Normal)    WOOL
QUICK WASH    JEANS    SMART

CLEANING    SILENT    FAVORITE 
TUB CLEAN   FUZZY(Normal) etc.

Select the desired program by pressing
the button.

• Use to start or pause the

washing process. 

• Repeats start and pause by

pushing the button.

• It only operates in FUZZY Program.
• During being detected by the sensor, the LED flashes green, orange and red in turn. And, after detecting, the

LED lights a specific color according to the detecting condition as follows:  

If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is determined as
better than the standard one, it optimizes the algorithm to save the energy by decreasing washing 
time/strength, and the LED automatically turns to red.  
If the current washing condition is determined as worse than the standard one, it optimizes the algorithm 
by increasing washing 
time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the algorithm has no change and
the LED turns to green.

• Use to turn the power on or off.
• Push again and power goes on or off 
• The power goes off automatically

about 10 seconds after the wash is
finished.

* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use  TUB

CLEAN course to clean the tub. (refer to page 21)

* Even if the water level is changed by the user in FUZZY(Normal) Program, the sensor will still work. The sensor

algorithm may differ according to models.

* The control panel may differ according to different models.