Read LG WD-N1213D6 Service Manual online
14
Be careful of electric shock or disconnecting the parts while trouble shooting.
Voltage of each terminal is 220-240V~ and DC while applying an electric current.
Voltage of each terminal is 220-240V~ and DC while applying an electric current.
7. TROUBLE SHOOTING
7-1. BEFORE SVC CHECKING
7-2. QC TEST MODE.
1. Pressing Rinse, and Temp. button simultaneously.
2. Press the Power button, while the above condition.
3. Press the Start/Pause button as follows.
2. Press the Power button, while the above condition.
3. Press the Start/Pause button as follows.
The digits means water level frequency(10-1 kHz)
ex) 241 : Water level frequency = 241
10
-1
kHz
= 24.1 kHz
Thermistor in tub : Press the [Temp.] button.
Thermistor in dry duct : Press the [Turbo Steam] button.
Thermistor in dry duct : Press the [Turbo Steam] button.
Press the Rinse and Temp. button simultaneously.
7-3. HOW TO KNOW THE WATER LEVEL FREQUENCY
7-4. HOW TO KNOW TO TEMPERATURE OF EACH THERMISTOR
AT OPERATING CONDITION.
Number of times the
Start/Pause button is pressed
Check Point
Display Status
None
1 time
2 time
Turns on all lamps and locks the door.
Tumble clockwise.
Low speed Spin.
High speed Spin.
Inlet valve for prewash turns on.
Inlet valve for main wash turns on.
Inlet valve for hot water turns on.
Inlet valve for dry water turns on.
Tumble counterclockwise.
Wash heater turns on for 3 sec.
Circulation pump turns on.
Drain pump turns on.
Dry heater turns on for 3 sec.
Power off and unlock the door
Rpm (42~50)
Rpm (55~60)
Rpm (95~108)
Water level frequency (25~65)
Water level frequency (25~65)
Water level frequency (25~65)
Water level frequency (25~65)
Rpm (42~50)
Water temperature.
Water level frequency (25~65)
Water level frequency (25~65)
Water temperature.
Turn off all lamps.
3 time
4 time
5 time
6 time
7 time
8 time
9 time
10 time
11 time
12 time
13 time
FOR LG TECHNICIAN
Click on the first or last page to see other WD-N1213D6 service manuals if exist.