Read LG WD-12401TDK / WD-12406TDK Service Manual online
29
■
■ Clean the drain pump filter
1. Open the lower cover cap ( )by
using a coin. Turn the drain plug
( )to pull out the hose.
2. Unplug the drain plug ( ),
allowing the water to flow out. At
this time use a vessel to prevent
water flowing on to the floor.
When water does not flow any
more, turn the pump filter
( )open to the left.
3. Remove any foreign material from
the pump filter ( ). After
cleaning, turn the pump filter ( )
clockwise and insert the drain
clockwise and insert the drain
plug ( )to the original place.
close the lower cover cap.
close the lower cover cap.
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER ASSEMBLY
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
(FRICTION DAMPER ASSEMBLY)
Damper
Rotor
Bolt
Hinge
(1)
Remove the BACK COVER.
Unscrew the bolt to pull out the ROTOR ASSEMBLY.
Disconnect the wiring connector.
Unscrew 6 bolts from the STATOR.
Remove the BODY FRAME. (Only 1400 rpm models)
Note :Hook of connector (1) is on the backside
Pull out the HINGE, pressing its snap.
Do not use the pulled out HINGE again
It may be taken off during operation.
It may be taken off during operation.
Click on the first or last page to see other WD-12401TDK / WD-12406TDK service manuals if exist.