Read LG WD-12401TDK / WD-12406TDK Service Manual online
28
DOOR ASSEMBLY
Open the door completely.
Remove the two screws from the hinge.
When removing the DOOR ASSEMBLY, it is necessary to
hold the BRACKET that is inner of the CABINET COVER.
hold the BRACKET that is inner of the CABINET COVER.
Take apart the CLAMP ASSEMBLY (cabinet).
Unscrew 2 screws from the CABINET COVER.
Open the lower cover cap and unscrew 1 screw inside
(Refer to page 27)
(Refer to page 27)
Take apart the LOWER COVER.
Disassemble the CONTROL PANEL ASSEMBLY.
(Refer to page 25)
(Refer to page 25)
Unscrew all the screws on the upper and lower sides of
the CABINET COVER.
the CABINET COVER.
Take apart the tub CLAMP ASSEMBLY
Make sure that the drain hole of the GASKET is put
beneath when reassembling the GASKET.
beneath when reassembling the GASKET.
Refer to the arrow mark on the TUB COVER.
GASKET
Click on the first or last page to see other WD-12401TDK / WD-12406TDK service manuals if exist.