Read LG WD-1022QD Service Manual online
Time Delay & Beep ON/OFF
• Press the button when reservation washing
is needed.
• When the button is pressed, [ ] is
displayed, maximum delay of [ ] hours
can be set.
can be set.
• Each press advances time delay by the hour.
• Use [Power] button to cancel [Time Delay]
• [Time Delay] means the time required from
• Use [Power] button to cancel [Time Delay]
• [Time Delay] means the time required from
the present to the completion of washing.
• The Beep on/off function can be set by
pressing and holding the Time Delay button
(About 3 seconds).
The Beep on/off function can be set at any time
and it is automatically cancelled in the event of
a power cut.
The Beep on/off function also works when
power is off.
(About 3 seconds).
The Beep on/off function can be set at any time
and it is automatically cancelled in the event of
a power cut.
The Beep on/off function also works when
power is off.
Power button
• Press the button to turn power on and off.
• Press the button to cancel the time delay.
• Press the button to cancel the time delay.
LOAD TEST MODE
Page 19
- Press and Hold ‘
Temp.
’ & ‘
Spin
’ buttons and then press ‘
Power
’ button.
Water level frequency
- Press and Hold ‘
Temp.
’ & ‘
Medic Rinse
’ buttons simultaneously.
13
Spin Button
• By pressing the Spin Button the spin speed
can be chosen
• WD-1022QD
Rinse Hold/No spin/400/800/1000
• F12**QD
Rinse Hold/No spin/400/800/1200
LED display
• Display the estimated remaining time
(Hour : Minute) to finish.
• In case of abnormal operation, error indications are
displayed.
( )
( )
• See troubleshooting guide.
Water temperature selector
• Press the button to select water temperature.
• 95°C is selected for Cotton and Baby Care
• 95°C is selected for Cotton and Baby Care
only.
• By pressing the button while operating the
washer, the present temperature is displayed.
Click on the first or last page to see other WD-1022QD service manuals if exist.