T8502DPE - LG Washing Machine Service Manual (repair manual). Page 17

 

 

TIME LEFT, DELAY, ALARM INDICATION 

●Use to improve the dehydration performance, 
prevent the mold caused by moist air.。 
● During "Air Dry", only "START/PAUSE", 

"PROGRAM" and "POWER" button are 
available. 

● “AIR DRY” will go on till the power is off 

● Time left-During operation, the remaining time is 
indicated。 
●DELAY START 
INDICATION(RESERVATION)-When DELAY 
START(RESERVATION) program is selected, it 
indicates the finishing time。 
●Alarm indication-When an error occurs, an error 

message appears to indicate the abnormality. For 

example, 

indicates that the lid is open。 

   

STREAM 

●The stream strength 

can be adjusted 

manually with a 

cycle of 

medium→strong→w

eak according to 

requirements. 

 

 

● According to the weight of laundry, this 

machine detects the quantity of laundry 
automatically, then sets and displays the 
WATER LEVEL and proper amount of 
Detergent. 

 
● The water level can be adjusted manually 

with a cycle of 
[7→8→9→10→1→2→3→4→5→6→
7…] According to requirements as the 
button is pressed. 

 

●Use to adjust washing time. 
 
●Washing time can be adjusted 

manually according to 
requirements and the time is 
increasing with certain 
sequence as the button is 
pushed. 

●Press "START/PAUSE" button 

before adjusting the "WASH" 
program. 

● Press  "RINSE" button to 

adjust rinsing times. 

 
● The rinsing times can be 

adjusted manually 
according to requirements 
and  are no more than 
five.[1→2→3→4→5→off
→1] 

 

●Use to lock or unlock the 

control buttons to prevent 
settings from being changed by 
a child。 

●To lock, push the RINSE and 

SPIN buttons simultaneously 
for 3 seconds。 

●“CHILD LOCK” is activated 

with sound “DINGDING” and 
screen displays

 

every 2 seconds. During the 
“CHILD LOCK”, all the 
buttons are locked including 
“POWER”.  

●If you want to unlock during 

wash, press both “WASH” and 
“SPIN” button simultaneously 
again. 

 

4.  Because of automatically optimization of the micro-processor, the display time may change. The increase and 

decrease of the old time should not exceed 8 minutes and 4 minutes respectively. 

5. 

The standard that compared with sensor result is set up according to the normal standard, which may not 

conform with some specific users.

 

6. 

The detergent amount sensor is designed according to the synthetic detergent. If you add liquid detergent, 
soap powder or overdose bleach, sensor sensitivity will degrade.

   

 
 

 17