T8502DPE - LG Washing Machine Service Manual (repair manual). Page 15

 

 

  TIME LEFT, DELAY, ALARM INDICATION 

●Air Dry: improve the dehydration performance, 

prevent the mold caused by moist air.。 

● During "Air Dry", only "START/PAUSE", 

"PROGRAM" and "POWER" button are 
available. 

● “AIR DRY” will go on till the power is off 

● Time left-During operation, the remaining time is 
indicated。 
●DELAY START 
INDICATION(RESERVATION)-When DELAY 
START(RESERVATION) program is selected, it 
indicates the finishing time。 
●Alarm indication-When an error occurs, an error 
message appears to indicate the abnormality. For   
example, 

indicates that the lid is open。 

 

STREAM 

●The stream strength can be 

adjusted manually with a 

cycle of 

medium→strong→weak 

according to requirements. 

 

 

 

●Use to adjust washing 

time. 

 
●Washing time can be 

adjusted manually 
according to 
requirements and the 
time is increasing 
with certain sequence 
as the button is 
pushed. 

●Press 

"START/PAUSE" 
button before 
adjusting the 
"WASH" program. 

●Press “RINSE" button to 

adjust rinsing times. 

 
● The rinsing times can be 

adjusted manually 
according to requirements 
and  are no more than 
five.[1→2→3→4→5→off
→1] 

 

●Use to lock or unlock the 

control buttons to prevent 
settings from being 
changed by a child。 

●To lock, push the RINSE 

and SPIN buttons 
simultaneously for 3 
seconds。 

●“CHILD LOCK” is 

activated with sound 
“DINGDING” and screen 
displays

 every 

2 seconds. During the 
“CHILD LOCK”, all the 
buttons are locked 
including “POWER”.   

●If you want to unlock 
during wash, press both 
“WASH” and “SPIN” 
button simultaneously 
again.

 

1.  Because of automatically optimization of the micro-processor, the display time may change. The increase and 

decrease of the old time should not exceed 8 minutes and 4 minutes respectively. 

2. 

The standard that compared with sensor result is set up according to the normal standard, which may not 
conform to some specific users.

 

3. 

The detergent amount sensor is designed according to the synthetic detergent. If you add liquid detergent, 
soap powder or overdose bleach, sensor sensitivity will degrade.

   

 

 15