Read LG F1256NDP5 Service Manual online
28
Remove the BACK COVER.
Unscrew the bolt to pull out the ROTOR assembly.
Disconnect the wiring connector.
Unscrew 6 bolts from the STATOR.
Remove the STATOR.
Note : Hook of connector (1) is on the backside
Pull out the hinge, pressing its snap.
Do not use the pulled-out hinge again. It may be taken
off during operation.
Hinge,
Damper
Damper
Damper
(1)
Rotor
Bolt
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER ASSEMBLY
(DAMPER)
Open the lower cover cap (
) by
using a coin. Turn the drain plug
(
(
) to pull out the hose.
Unplug the drain plug (
) , then
the water flows out,
At this time use a vessel
to prevent water from flowing on the
floor. If the water does not flow any
more, turn the pump filter (
At this time use a vessel
to prevent water from flowing on the
floor. If the water does not flow any
more, turn the pump filter (
)
open to the left.
Take out any foreign material
from the pump filter (
from the pump filter (
). After
cleaning, turn the pump filter(
)
clockwise and insert the
drain plug (
drain plug (
) to the original
place. close the lower cover cap.
Clean the drain pump filter
1
100
2
3
2
3
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
Click on the first or last page to see other F1256NDP5 service manuals if exist.