Read LG 40002 Service Manual online
30
Remove pump outlet hose.
Remove tub pump bellows.
Remove cap (Remaining Hose.)
Disconnect the wiring.
Unscrew 2 screws.
Remove the pump.
Loosen the M6 heater nuts to pull out the
HEATER ASSEMBLY.
HEATER ASSEMBLY.
When mounting the HEATER ASSEMBLY be
sure to insert the HEATER ASSEMBLY into the
heater clip on the bottom of the tub.
sure to insert the HEATER ASSEMBLY into the
heater clip on the bottom of the tub.
Pull it out by holding the THERMISTOR
bracket.
If it is pulled by the wire, it may be broken.
When mounting the THERMISTOR again,
make sure
that it is got back tight to the bushing.
bracket.
If it is pulled by the wire, it may be broken.
When mounting the THERMISTOR again,
make sure
that it is got back tight to the bushing.
CAUTION
Click on the first or last page to see other 40002 service manuals if exist.