60PZ950-UA, 60PZ950U-UA (CHASSIS:PU12A) - LG TV Service Manual (repair manual). Page 10

V

Adj. condition and cautionary items

(1) Lighting condition in surrounding area

Surrounding  lighting  should  be  lower  than  10  lux.    Try
to isolate adj. area into dark surrounding.

(2) Probe location

- PDP : Color  Analyzer  (CA-100,  CA-100+,  CA210)

probe should be firmly attached to the Module

- LCD : Color Analyzer (CA-210) probe should be within

10cm  and  perpendicular  of  the  module  surface
(80°~ 100°)

- In  case  of  LCD,  B/L  on  should  be  checked  using  no

signal or Full white Pattern

O 

Standard color coordinate and temperature using CS-1000

O 

Luminance: Full white 216 Gray

O 

Standard  color  coordinate  and  temperature  using  CA-210(CH
10)

- Gain color coordinate

O 

Pattern : Full white 216 Gray

- Offset color coordinate : Only THX model

O 

Pattern : Full white 50 Gray 

O 

Luminance : 5 ± 4 cd

(1) Press the EYE Key on the adjustment remote controller.
(2) Check the Sensor DATA ( It must be under 10) and keep

the data longer than 1.5s

(3) Check ‘OK’

(Sensor DATA 0 ~ 4095, Power Saving Mode 0 ~ 12)

* IF you press IN-STAP Button, change Green Eye-check OSD.

* This test is to check Network operation.

(1) Play the LAN Port Test PROGRAM.
(2) Input IP set up for an inspection to Test 

*IP Number : 12.12.2.2

* In this case Network setting is on Manual Setting.
(1) Play the LAN Port Test Program.
(2) connect each other LAN Port Jack.
(3) Play Test (F9) button and confirm OK Message.
(4) remove LAN CABLE

12. Check Wireless function.

(1) Connect  set  and  Dongle  of  Wireless  to  Cable  of  HDMI  &

TTA 20Pin 

(2) At OSD of SET, check the message like Fig 3.
(3) Detach Cable of Wireless Dongle 

- 10 -