Read LG 50PT350B-SG (CHASSIS:PB12K) Service Manual online
5. Factory Adjustment
5-1. Auto Adjust Component
480i/1080p RGB 1080p
(1) Summary : Adjustment component 480i/1080i and RGB
1080p is Gain and Black level setting at Analog
to Digital converter, and compensate the RGB
deviation
to Digital converter, and compensate the RGB
deviation
(2) Using instrument
1) Adjustment remocon, 801GF(802B, 802F, 802R) or
MSPG925FA pattern generator
(It can output 480i/1080i horizontal 100 % color bar
pattern signal, and its output level must setting
0.7 V ± 0.1 V p-p correctly)
pattern signal, and its output level must setting
0.7 V ± 0.1 V p-p correctly)
* You must make it sure its resolution and pattern cause every
instrument can have different setting
2) Adjustment method 480i Comp1, Adjust 1080p
Comp1/RGB (Factory adjustment)
O
ADC 480i Component1 adjustment -
- Check connection of Component1
- MSPG-925FA Ë Model: 209, Pattern 65
- MSPG-925FA Ë Model: 209, Pattern 65
O
Set Component 480i mode and 100% Horizontal
Color Bar Pattern(HozTV31Bar), then set TV set to
Component1 mode and its screen to “NORMAL”
Color Bar Pattern(HozTV31Bar), then set TV set to
Component1 mode and its screen to “NORMAL”
O
ADC 1080p Component1 / RGB adjustment
- Check connection both of Component1 and RGB
- MSPG-925FA Ë Model: 225, Pattern 65
- MSPG-925FA Ë Model: 225, Pattern 65
O
Set Component 1080p mode and 100% Horizontal
Color Bar Pattern(HozTV31Bar), then set TV set to
Component1 mode and its screen to “NORMAL”
Color Bar Pattern(HozTV31Bar), then set TV set to
Component1 mode and its screen to “NORMAL”
O
After get each the signal, wait more a second and
enter the “IN-START” with press IN-START key of
Service remocon. After then select “7. External ADC”
with navigator button and press “Enter”.
enter the “IN-START” with press IN-START key of
Service remocon. After then select “7. External ADC”
with navigator button and press “Enter”.
O
After Then Press key of Service remocon “Right
Arrow(VOL+)”
Arrow(VOL+)”
O
You can see “ADC Component1 Success”
O
Component1 1080p, RGB 1080p Adjust is same
method.
method.
O
Component 1080p Adjustment in Component1 input
mode
mode
O
RGB 1080p adjustment in RGB input mode
O
If you success RGB 1080p Adjust. You can see “ADC
RGB-DTV Success”
RGB-DTV Success”
Caution : Set Volume 0 after adjustment
-
ADJ(EZ ADJUST) -> 6.ADC Calibration -> ADC
Calibration(START)
Calibration(START)
5-3. EDID(The Extended Display
Identification Data) / DDC(Display Data
Channel) download
Channel) download
(1) Summary
1) It is established in VESA, for communication between
PC and Monitor without order from user for building user
condition. It helps to make easily use realize “Plug and
Play” function.
condition. It helps to make easily use realize “Plug and
Play” function.
2) For EDID data write, we use DDC2B protocol.
5-4. Auto Download
(1) After enter Service Mode by pushing “ADJ” key,
(2) Enter EDID D/L mode.
(3) Enter “START” by pushing “OK” key.
(2) Enter EDID D/L mode.
(3) Enter “START” by pushing “OK” key.
Caution
- Never connect HDMI & D-sub Cable when the user
- Never connect HDMI & D-sub Cable when the user
downloading .
- Use the proper cables below for EDID Writing.
O
- 7 -
< Adjustment pattern : 480i / 1080p 60Hz Pattern >
Click on the first or last page to see other 50PT350B-SG (CHASSIS:PB12K) service manuals if exist.