Read LG 50PQ100R-ZA (CHASSIS:PP91A) Service Manual online
O
FHD EDID DATA (50/60inch–PQ70BR, PS60FR, PS80BR Tool )
<Analog(RGB): 128bytes>
< HDMI 1 : 256bytes>
< HDMI 2 : 256bytes>
<HDMI 3 : 256Bytes> SIDE HDMI(HDMI 3)
6. HDCP(High-Bandwidth Digital
Contents Protection) Download
HDCP download process is deleted in H6 models
In H6 models, it is usimg the EEPROM masking HDCP Key
In H6 models, it is usimg the EEPROM masking HDCP Key
7. Manual ADC Adjustment
(Component 1, RGB)
[Caution]
- Do not connect external input cable
- Adjustment result is applied to SET On/Off later.
- Adjustment result is applied to SET On/Off later.
* Adjustment is done using internal ADC, so input signal is not
necessary.
7-1. COMPONENT ADC (SD / HD)
(1) Convert to Component1 input source.
(2) Press ADJ key on R/C for adjustment.
(3) Enter Password number. The value of Password is “0 0 0
(2) Press ADJ key on R/C for adjustment.
(3) Enter Password number. The value of Password is “0 0 0
0”.
(4) Select “0. ADC calibration” by using
D
/
E
(CH +/-) and press
ENTER(
V
).
(5) Start ADC adjustment by using
F
/
G
(VOL +/-) or press
ENTER(
V
).
(6) ADC adjustment is executed automatically .
When ADC adjustment is finished, this OSD appear.
7-2. RGB input ADC
(PP91C/D Not Support)
Auto RGB Gain/Offset Adjustment
(1) Convert to PC in Input-source
(2) Press ADJ key on R/C for adjustment.
(3) Enter Password number. The value of Password is “0 0 0
(2) Press ADJ key on R/C for adjustment.
(3) Enter Password number. The value of Password is “0 0 0
0”.
(4) Select “0. ADC calibration” by using
D
/
E
(CH +/-) and press
ENTER(
V
).
(5) Start ADC adjustment by using
F
/
G
(VOL +/-) or press
ENTER(
V
).
(6) ADC adjustment is executed automatically .
When ADC adjustment is finished, this OSD appear.
Notice : After All mode check, set the Speaker Volume “0”.
7-3. SCART RGB input ADC
(Only for PP91C/D)
(1) Convert to RF input source.
(2) Press ADJ key on R/C for adjustment.
(3) Enter Password number. The value of Password is “0 0 0
(2) Press ADJ key on R/C for adjustment.
(3) Enter Password number. The value of Password is “0 0 0
0”.
(4) Select “0. ADC calibration” by using
D
/
E
(CH +/-) and press
ENTER(
V
).
(5) Start ADC adjustment by using
F
/
G
(VOL +/-) or press
ENTER(
V
).
(6) ADC adjustment is executed automatically .
When ADC adjustment is finished, this OSD appear
- 11 -
RF input
NO SIGNAL or White noise
AV / Component / RGB input
NO SIGNAL
Click on the first or last page to see other 50PQ100R-ZA (CHASSIS:PP91A) service manuals if exist.