50PG6300-ZA (CHASSIS:PD85A) - LG TV Service Manual (repair manual). Page 15

Read LG 50PG6300-ZA (CHASSIS:PD85A) Service Manual online

 
­15­
       
10. Adjustment Instruction
 
10.1 ATV/DTV SW Upgrade   
1)  Preparations for SW Upgrade : PC (for SW Upgrade through RS-232C) / RS-232C Cable 
2)  Unzip and install the files. 
 
WDN4OAK+.z ip
 
3)  Switch to DTV mode. 
4)  Enter Standby mode. 
5)  Double-click the “WDN4OAK+” file“. 
6)  Click the yellow folder button to select HDF file for downloading. 
7)  Click “DownLoad” button to start downloading. 
8)  Push the Standby button to make the unit operating. 
 
9)  Check for S/W version by going to the Factory Mode, press “Menu”, “1”, “2”, “4”, 7” and “5” keys on a 
remote. 
 
10.2 White Balance Calibration 
1)    Make sure the unit has sufficient warm-up time which is about 5 minutes. 
Æ
 Be sure that the unit is switched to Analog TV Mode.   
(PWM Dimming: Max, Analog Dimming: 1.65V) 
2)  Adjustment: PC Mode, 1024x768@60Hz, 75% ~ 80% Full White Pattern 
3)  Press “MENU, ”1” , ”2” , “4”, “7” , and “5” keys on a remote 
4)  Select the factory, and then press the OK bottom on remote 
5)  Select Color Temp, and then press the OK bottom on remote 
6)  Adjust the Color Temp for each mode 
The full dynamic range of the module when the RGB gain on the OSD is “512” In order to adjust the 
white balance with no saturation of the full dynamic range and the data,Fix on of the RGB gains to 
512 and decrease the remaining two gains to adjust. 
7) Calibration Spec 
-. Cool : X(0.276±0.002), Y(0.283±0.002)Æ11,000ºK±500ºK 
Page of 73
Display

Click on the first or last page to see other 50PG6300-ZA (CHASSIS:PD85A) service manuals if exist.