47LH85 (CHASSIS:LA92F) - LG TV Service Manual (repair manual). Page 12

4.2.1 Overview

It is a VESA regulation. PC or a MNT will display an
optimal resolution through information sharing without any
necessity of user input. It is a realization of “Plug and Play”.

4.2.2 Equipment

- Adjust remocon

4.2.3 Download method

1) Press ADJ key on the adjustment  R/C and select [EZ

ADJUST]. Select [8.EDID D/L] and access to the items
with using the ENTER key. 

2) Press the OK key on the [Start] menu, HDMI1 / HDMI2 /

HDMI3 / HDMI4 / RBG inputs are selected on the
Media-Box and HDMI5 input on the TV. When the
process is completed, the message 'NG' is changed to
'OK'.  

* You can download this with using JIG or the equipment

on the HDMI5 / RGB input. 

4.2.4 EDID DATA

- HDMI 

EDID Block 0 table =

EDID Block 1 table =

EDID Block 1 table =

* Notice
- HDMI1 ~ HDMI4 / RGB : Media-Box, Hdmi5 : TV
- The items below of the EDID datas can be changed

according to the S/W and input. 

=> VV:Week Manufacture
=> WW: Year Manufacture
=> XX:C/S
=> YY : Physical address

• The Wireless model can be added the pairing work with the

Media-Box besides the existing test and can be changed
the process and the test method. 

•  Total Assembly  process 

- TV Tool option check 
- Connect the TV and Media-Box wireld with the HDMI

cable. (TV: HDMI5 port / Media-Box: Service port) 

- Wireless Pairing 
- Media-Box Tool option check 
- Media-Box AC power off 
- Remove the HDMI cable 
- Adjust the White Balance 
- Media-Box AC power on (Access to Wireless mode) 
- Check the Display and press the Bluetooth key (send the

TV W/B data to Media-Box) 

- Connect the RF / HDMI1 to Media-Box and check. 
- Shipping 

* The Media-Box is the main equipment and the TV is after on

the Wireless/Wired connection and the Media-Box can
adjust all of the OSD) 

(exception: Select the HDMI5 on the Wireless connection) 

5.1.1 Overview

To set 1:1 connection from selecting the same Wireless
channel on the TV and Media-Box, and fixing Mac
address. 
* Set this on the Wired (HDMI cable connection) state. 

5.1.2 Method 

1) Press one of the OP1(Channel1) / OP2(Channel2) /

OP3(Channel3) key on the adjustment R/C and check
the Paring information OSD that is displayed  

2) Use these method if the upper method can not be

processed  

- 12 -