47LH30 (CHASSIS:LA92A) - LG TV Service Manual (repair manual). Page 16

Read LG 47LH30 (CHASSIS:LA92A) Service Manual online

5.2.5.2 Manual adj. method
1) Set TV in Adj. mode using POWER ON
2) Zero Calibrate the probe of Color Analyzer, then place it on
the center of LCD module within10cm of the surface..
3) Press ADJ key -> EZ adjust using adj. R/C Æ 6. White-
Balance then press the cursor to theright (KEY
).
(When KEY(
) is pressed 216 Gray internal pattern will be
displayed)
4) One of R Gain / G Gain / B Gain should be fixed at 192,
and the rest will be lowered to meet the desired value.
5) Adj. is performed in COOL, MEDIUM, WARM 3 modes of
color temperature.
• If internal pattern is not available, use RF input. In EZ Adj.
menu 6.White Balance, you can select one of 2 Test-pattern:
ON, OFF. Default is inner(ON). By selecting OFF, you can
adjust using RF signal in 216 Gray pattern.
• Adj. condition and cautionary items
1) Lighting condition in surrounding area Surrounding lighting
should be lower 10 lux. Try to isolate adj. area into dark
surrounding.
2) Probe location
- PDP: Color Analyzer (CA-100, CA-100+, CA210) probe
should be firmly attached to the Module
- LCD: Color Analyzer (CA-210) probe should be within 10cm
and perpendicular of the module surface (80°~ 100°)
3) Aging time
- After Aging Start, Keep the Power ON status during 5
Minutes.
- In case of LCD, Back-light on should be checked using no
signal or Full-white pattern.
5.2.6 Reference (White Balance Adj. coordinate and color
temperature)
• Luminance: 216 Gray
• Standard color coordinate and temperature using CS-1000
(over 26 inch)       
• Standard color coordinate and temperature using CA-210(CH 9)
5.3 Option selection per country 
1) Press ADJ key on the Adj. R/C, then select Country Group
Meun.
2) Depending on destination, select KR, then on the lower
Country option. Selection is done using +, - KEY
6. USB S/W Download(option)
1. Put the USB Stick to the USB socket
2. Automatically detecting update file in USB Stick
- If your downloaded program version in USB Stick is Low, it
didn’t work. But your downloaded version is High, USB data is
automatically detecting
3. Show the message “Copying files from memory”
4. Updating is staring.
5. Updating Completed, The TV will restart automatically
6. If your TV is turned on, check your updated version and
Tool option. (explain the Tool option, next stage)
* If downloading version is more high than your TV have, TV
can lost all channel data. In this case, you have to channel
recover. if all channel data is cleared, you didn’t have a
DTV/ATV test on production line.
* After downloading, have to adjust TOOL OPTION again.
1. Push "IN-START" key in service remote controller.
2. Select "Tool Option 1" and Push “OK” button.
3. Punch in the number. (Each model has their number.)
- 16 -
LG Electronics. Inc. All right reserved. 
C
2009
Coordinate 
Mode 
x y 
Temp uv
Cool 0.276 0.283  11000K  0.0000
Medium 0.285  0.293 
9300K 
0.0000
Warm 0.313  0.329 
6500K  0.0000
Coordinate 
Mode 
x y 
Temp uv
Cool 0.276±0.002 0.283±0.002 11000K 0.0000
Medium 0.285±0.002  0.293±0.002 
9300K 
0.0000
Warm 0.313±0.002  0.329±0.002  6500K  0.0000
Model    Tool1   Tool2  Tool3 Tool4
Menu
47LH30  32897   2600   932    1152   3 HDMI,CAN Tuner,1 RCA
 
 
 
 
 
Page of 34
Display

Click on the first or last page to see other 47LH30 (CHASSIS:LA92A) service manuals if exist.