Read LG 42PG6900-ZF (CHASSIS:PD84A) Service Manual online
- 7 -
3-2. Adjustment of Component
O
Standard equipment : 802F Pattern Generator. Master
Pattern Generator(MSPG-925, etc) or same product
O
Required Equipments
1) Remote controller for adjustment
2) MSPG-925FS Pattern Generator (Which has Video
2) MSPG-925FS Pattern Generator (Which has Video
Signal: 7 Color Bar Pattern shown in Fig. 1).
==> Model: 215 / Pattern: 65
==> Model: 215 / Pattern: 65
(1) Input the Component 720p/50Hz 7 Color Bar(MSPG-
925FS model: 215, pattern: 65) signal into Component.
(2) Set the PSM to Vivid mode in the Picture menu.
(3) Press IN-START key on R/C for adjustment
(4) Press the
(4) Press the
G
(Vol. +) key to operate the set, then it
becomes automatically
(5) Auto-RGB OK means the adjustment is completed
3-3. Adjustment of RGB
O
Standard equipment: PC Pattern Generator(VG828,
VG854, 801GF, MSP3240A) or same product
O
Required Equipments
1) Remote controller for adjustment
2) MSPG-925FS Pattern Generator
2) MSPG-925FS Pattern Generator
(Which has Video Signal: 7 Color Bar Pattern shown in
Fig. 1).
Fig. 1).
(1) Input the PC 1024x768 @ 60Hz 7 color bar (MSPG-
925FS, Model: 3, Pattern: 65) into RGB. (using D-sub to D-
sub cable)
sub cable)
(2) Set the PSM to Vivid mode in Picture menu.
(3) Press the IN-START key on R/C for adjustment.
(4) Press the
(4) Press the
G
(Vol. +) key operate To set , then it becomes
automatically.
(5) Auto-RGB OK means adjustment is completed.
(6) Press the
(6) Press the
G
(Vol. +) key to operate the set, then it
becomes automatically
(7) Auto-RGB OK means the adjustment is completed
3-4. Adjustment of SCART-RGB
O
Standard equipment : Master Pattern Generator(MSPG-
925, etc) or same product
O
Required Equipments
1) Remote controller for adjustment
2) MSPG-925FS Pattern Generator (Which has Video
2) MSPG-925FS Pattern Generator (Which has Video
Signal: 8 Color Bar Pattern shown in Fig. 2).
==> Model: 232/ Pattern: 8
==> Model: 232/ Pattern: 8
(1) Input the SCART-RGB 8 Color Bar(MSPG-925FS model:
232, pattern: 8) signal into AV1. (using Full Scart Cable)
(2) Set the PSM to Vivid mode in the Picture menu.
(3) Press IN-START key on R/C for adjustment
(4) Press the
(4) Press the
G
(Vol. +) key to operate the set, then it
becomes automatically
(5) Auto-RGB OK means the adjustment is completed
4. Channel Memory Setting Method
Recovery the channel memory by adjust R/C.
You can set channel memory by R/C for adjustment
(1) Press ADJ key on R/C for adjustment.
(2) Press VOL + key on “Channel Recover”
(1) Press ADJ key on R/C for adjustment.
(2) Press VOL + key on “Channel Recover”
5. PCMCIA CARD Checking Method
You must adjust DTV ## Channel and insert PCMCIA
CARD to socket.
CARD to socket.
(1) If PCMCIA CARD works normally, normal signals display
on screen.
But it works abnormally, “No CA module” words display on
screen.
But it works abnormally, “No CA module” words display on
screen.
[
Caution : Before power off, input mode must be changed
RF mode.
<Fig. 1> Color Bar Signal
<Fig. 2> 8 Color 16 Step Gray Signal
<Fig. 1> Color Bar Signal
Click on the first or last page to see other 42PG6900-ZF (CHASSIS:PD84A) service manuals if exist.