42PC5D-DB (CHASSIS:PT-73A) - LG TV Service Manual (repair manual). Page 8

(3) Press IN-START key on R/C for adjustment.
(4) Press the 

G

(Vol. +) key to operate the set, then it

becomes automatically.

(5) Auto-RGB OK means the adjustment is completed.

(1) Remote controller for adjustment
(2) MSPG-925FS Pattern Generator

(Which has XGA [1024*768] 60Hz, 7 color bar 100%
shown in Fig. 8)

(1) Input the PC 1024x768 @ 60Hz 7 color bar 100% (MSPG-

925FS, Model:60, Pattern:65) into RGB. (using D-sub to D-
sub cable)

(2) Set the PSM to Dynamic mode in Picture menu.
(3) Press the IN-START key on R/C for adjustment.

(4) Press the 

G

(Vol. +) key to operate the set, then it

becomes automatically

(5) Auto-RGB OK means the adjustment is completed

Before adjusting White-balance , the AV ADC should be done.

(1) Remote controller for adjustment
(2) Color Analyzer ( CA-100+ or same product ) : CH 10

(PDP) , CH 9 (LCD)

(3) Auto W/B adjustment instrument(only for Auto adjustment)
(4) AV Pattern Generator

O

Color temperature standards according to CSM and Module

O

White balance adjustment coordinate and color temperature

PC (for communication through RS-232C) ==> UART Baud
rate : 115200 bps

[

Automatic control )
Inside PATTERN is used when W/B is controlled. Connect to
auto controller or push control R/C IN-START
==> Enter the mode of White-Balance, the pattern will come
out.

O

Auto Adjustment Map(RS-232C)

- 8 -

<Fig. 8>  Color Bar Signal

<Fig. 9>  Connecting Picture(On Automatic Control)