Read LG 42PC5D-DB (CHASSIS:PT-73A) Service Manual online
- 7 -
6. Select Panel size and tool.
Before AV ADC Calibration, should be select the “Tool Option ”
(1) Press ADJ Key in the Adjust remocon.
(2) Select “Tool Option1” by using
(2) Select “Tool Option1” by using
D
/
E
(CH+/-) key, and
press
A
(ENTER).
(3) Change “Inch” and “Tool” according to the inch of model
name.
(4) After changing the panel size, push the EXIT Key.
7. ADC Calibration
[
Caution:
- System control RS-232 Host should be “PC” for
adjustment.
- Before AV ADC Calibration, execute the “Panel size
selection”
8. Auto AV(CVBS) Color Balance
8-1. Requirement
(1) This AV color balance adjustment should be performed
before White Balance Adjustment.
(2) Mandatory point : All models are adjusted twice of NTSC
and PAL in AV mode.
8-2. Required Equipment
(1) Remote controller for adjustment
(2) MSPG-925FS Pattern Generator (Which has Video Signal:
(2) MSPG-925FS Pattern Generator (Which has Video Signal:
7 Color Bar Pattern shown in Fig. 7).
Model: 207 / Pattern: 65 Case 2) EC and FC model use
NTSC_J (composite signal)
Model: 207 / Pattern: 65 Case 2) EC and FC model use
NTSC_J (composite signal)
8-3. Method of Auto RF / AV / S-VIDEO
Color Balance(NTSC_J)
(1) Input the Video signal: 7 color Bar signal into AV1.
(2) Set the PSM to Dynamic mode in the Picture menu
(2) Set the PSM to Dynamic mode in the Picture menu
(3) Press INSTART key on R/C for adjustment.
(4) Press the
(4) Press the
G
(Vol. +) key operate to set, then it becomes
automatically.
(5) Auto-RGB OK means completed adjustment.
9. Adjustment of Component
9-1. Required Equipment
(1) Remote controller for adjustment
(2) MSPG-925FS Pattern Generator (Which has Video Signal:
(2) MSPG-925FS Pattern Generator (Which has Video Signal:
7 Color Bar Pattern shown in Fig. 7).
Model: 216 / Pattern: 65
Model: 216 / Pattern: 65
9-2. Method of Auto Component Color Balance
(1) Input the Component 720p/60Hz 7 Color Bar(MSPG-
925FS model:216, pattern:65) signal into Component.
(2) Set the PSM to Dynamic mode in the Picture menu.
<Fig. 6> Color Bar Signal
<Fig. 7> Color Bar Signal
Click on the first or last page to see other 42PC5D-DB (CHASSIS:PT-73A) service manuals if exist.