42LG80FR (CHASSIS:LP81G) - LG TV Service Manual (repair manual). Page 11

Before PCBA check, you have to change the Tool option, Area
option and have to AC off/on (Plug out and in)
(If missing this process, set can operate abnormally)

(1) Equipment : adjustment remote control.
(2) Profile : Must be changed the option value because being

different with some setting value depend on
module maker, inch and market.

(3) Adjustment method

The input methods are same as other chassis.(Use IN-
START Key on the Adjust Remocon.)
(If not changed the option, the input menu can differ the
model spec.)
* Refer to Job Expression of each main chassis ass’y

(EBTxxxxxxxx) for Option value  

* Never push the IN-STOP KEY after completing the function

inspection.

** After TOOL Option/ Area Option change, you have to AC

off/oon (Plug out and in)

Before PCBA check , you ha ve to change the Tool opition,
Area option and have to AC off/on (Plug out and in)
(If missing this process, set can operate abnormally)

(1) Push In-start key on Adjust remote-control.
(2) Check “ MainV3.xx USB V3.xx”

* Caution

Use the proper signal cable for EDID Download

* Caution:

- Never connect HDMI & D-SUB Cable at the same time.
- Use the proper cables below for EDID Writing

* EDID Data

<Analog : 128bytes>

<HDMI 1 : 256bytes> / <HDMI 2 : 256bytes>
The data is same without Physical address

-> Physical address(F) : HDMI 1 -> 10, HDMI 2 -> 20

- 11 -

Item

Manufacturer ID

Version

Revision

Condition

GSM

Digital : 1

Digital : 3

Data

1E6D

01

03

For HDMI EDID

For RGB EDID