42LG70YD (CHASSIS:LB81D) - LG TV Service Manual (repair manual). Page 9

- 9 -

This specification sheet is applied to all of the LCD TV with
LB81D chassis.

1) The adjustment is according to the order which is designated

and which must be followed, according to the plan which can
be changed only on agreeing.

2) Power Adjustment: Free Voltage
3) Magnetic Field Condition: Nil.
4) Input signal Unit: Product Specification Standard
5) Reserve after operation: Above 5 Minutes (Heat Run)

Temperature : at 25±5ºC 
Relative humidity : 65±10%
Input voltage : 220V, 60Hz

6) Adjustment equipments: Color Analyzer (CA-210 or CA-

110), Pattern Generator (MSPG-925L or Equivalent), DDC
Adjustment Jig equipment, SVC remote controller

7) Don’t push The “IN STOP” key after completing the function

inspection.

* APC - After Manual-Insult, executing APC

1) Execute ISP program “Mstar ISP Utility” and then click

“Config” tab.

2) Set as below, and then click “Auto Detect” and check “OK”

message. If display “Error”, Check connect computer, jig,
and set.

3) Click “Connect” tab.

If display “Can’t”, Check connect computer, jig, and set.

4) Click “Read” tab, and then load download file(XXXX.bin) by

clicking “Read”.

5) Click “Auto” tab and set as below
6) Click “Run”.
7) After downloading, check “OK” message.  

1) Put the USB Stick to the USB socket 

2) Automatically detecting update file in USB Stick

- If your downloaded program version in USB Stick is Low,

it didn’t work. But your downloaded version is High, USB
data is automatically detecting

3) Show the message “Copying files from memory”

4) Updating is staring.

5) Fishing the version uploading, you have to put USB stick

and “AC Power” off.

6) After putting “AC Power” on and check updated version on

your TV.

USB

(1)

(3)

(2)

 OK

Please Check Speed :
To us speed between from 200 KHz
to 400 KHz

(4)

filexxx.bin

(5)

(7) ........ OK

(6)

filexxx.bin