37LC5DC (CHASSIS:LA64A) - LG TV Service Manual (repair manual). Page 13

- 13 -

1) Select HCS12
2) Target Frequency Settings : 

A. Checking the factor -> Use Specified Target Frequency

, Unsecure target

.

B. Insert Target Bus Frequency -> 7372800

3) Specify Algorithm: 9S12dt128_128k .12P 
4) Specify S Record: select download file. 
5) Checking factor: Erase Device, Blank Check Device,

Program Device, Verify Device 

* Notice!
Don't check other checking boxes. You must follow fig.
6) Push the 'Save Image to Cyclone PRO' button, files

transfer from PC to the Download JIG. 

5.1 Setting up like figure
(Setting: Press ADJ Key in the Adjust remocon.
Select  "System Control 3" by using  

/

(CH+/-) key, and press

(ENTER)

Using Adjust remocon, select module)

6.1 Auto AV (CVBS) Color Balance

6.1.1 Required Equipment
- Remote controller for adjustment 
- AV Pattern Generator: 802F Pattern Generator, Master

(MSPG-925FS), etc

(Which has NTSC-J Composite Video format output with
standard (1.0 Vpp) See Fig. 1)  

- It is very import to use correct adjustment pattern like

Fig.1. 

6.1.2 Method of Auto AV (CVBS) Color Balance
1) Input the NTSC-J Composite Video (Fig.1.) into video

input. 

=> MSPG-925FS Model No: 207 / Pattern No: 65 / NTSC-J
2) Set the EZ Picture to Daylight mode in Video menu.
3) Press INSTART key on R/C for adjustment.
4) Press  the 

(Vol. +) key operate to set, then it becomes

automatically.

5) Auto-RGB OK means completed adjustment.

* When adjust main picture, sub picture is included.

PC -> Download Jig

<Fig.1> Auto AV (CVBS) Color Balance Test Pattern

Default Value on OSD

Before ADC Calibration, should be executed the "Module type
selection".