Read LG 32PC50-ZB (CHASSIS:PP78C) Service Manual online
- 10 -
8-2. Required Test Equipment
(1) Adjusting PC with S/W for writing EDID Data.
(S/W : EDID TESTER Ver.2.5)
(2) A Jig for EDID Download.
(3) Cable : Serial(9Pin or USB) to D-sub 15Pin cable, D-sub
(3) Cable : Serial(9Pin or USB) to D-sub 15Pin cable, D-sub
15Pin cable, DVI to HDMI cable.
8-3. Preparation for Adjustment
(1) As above (Fig. 2), Connect the Set, EDID Download Jig,
PC & Cable.
(2) Turn on the PC & EDID Download Jig. And Execute the
S/W : EDID TESTER Ver 2.5.
(3) Set up S/W option.
Repeat Number : 5
Device Address : A0
PageByte : 8
Device Address : A0
PageByte : 8
(4) Power on the Set.
8-4. Sequence of Adjustment
(1) DDC data of Analog-RGB
1) Init the data.
2) Load the EDID data.(Open File).
[ Analog-RGB : PP78C_RGB.ANA ]
[ Digital-HDMI1 : PP78C_HDMI1.DVI ]
[ Digital-HDMI2 : PP78C_HDMI2.DVI ]
[ Digital-HDMI1 : PP78C_HDMI1.DVI ]
[ Digital-HDMI2 : PP78C_HDMI2.DVI ]
3) Set the S/W as below.
4) Push the “Write Data & Verify”button. And confirm “Yes”.
5) If the writing is finished, you will see the “OK” message.
(Fig. 2) Connection Diagram of DDC download
Open File
Open File
Click on the first or last page to see other 32PC50-ZB (CHASSIS:PP78C) service manuals if exist.