32LH7000, 32LH7020, 32LH7030 (CHASSIS:LD91D) - LG TV Service Manual (repair manual). Page 11

4) Updating is staring.

5) Fishing the version uploading, you have to put USB stick

and “AC Power” off.

6) After putting “AC Power” on and check updated version

on your TV.

* If downloading version is more high than your TV have, TV
can lost all channel data. In this case, you have to
channel recover. if all channel data is cleared, you didn’t
have a DTV/ATV test on production line.

* After downloading, have to adjust TOOL

OPTION again.

1) Push "IN-START" key in service remote controller 
2) Select “Tool Option 1” and Push “OK” button.
3) Punch in the number. (Each model hax their number)

4) Completed selecting Tool option.

(1) External ADC (Only adjust in the component mode 480I) 

• Input the Signal in the Component 1 -Component 480I

(Adjusted only this mode)

MODEL: 209 in Pattern Generator(480i Mode)
PATTERN : 65 in Pattern Generator( MSPG-925 Series)

• After enter Service Mode by pushing “ADJ” key,
• Enter the 5 item and then Push the “Start” button

• After enter Service Mode by pushing “ADJ” key
• Enter ADC Calibration mode by pushing “

G

” key at “5.

ADC Calibration

• Push the Start button

(3) Function Check

- Check display and sound

• Check Input and Signal items. (cf. work instructions)
1) TV
2) AV (SCART1/SCART2/ CVBS)
3) COMPONENT (480i)
4) RGB (PC : 1024 x 768 @ 60hz)
5) HDMI
6) PC Audio In
* Display and Sound check is executed by Remote

controller.

• W/B Equipment condition

CA210 : CH 9, Test signal : Inner pattern (85IRE)

• Above 5 minutes H/run in the inner pattern. (“power on” key

of adjust remote control)

- 11 -

 

 

Tool

1

2

3

4

Option

13824

3382

56744

2304

<Adjustment pattern(PC)>

Cool 11,000k ºK

X=0.276(±0.002)

Y=0.283(±0.002)

<Test Signal>

Medium 9,300k

ºK

X=0.285(±0.002)

Inner pattern

Y=0.293(±0.002)

(216gray,85IRE)

Warm

6,500k ºK

X=0.313(±0.002)

Y=0.329(±0.002)