32LG3DCH (CHASSIS:LA76B) - LG TV Service Manual (repair manual). Page 8

- 8 -

This specification sheet is applied for all of the LCD TV with
LA76B chassis.

1) The adjustment is according to the order which is

designated and which must be followed, according to the
plan which can be changed only on agreeing.

2) Power Adjustment : 100-240V~, 50/60Hz
3) Magnetic Field Condition : Nil.
4) Input signal Unit : Product Specification Standard
5) Reserve after operation : Above 30 Minutes 
6) Adjustment equipments: Color Analyzer(CA-210 or CA-

110), Pattern Generator (MSPG-925L or Equivalent), DDC
Adjustment Jig equipment, SVC remote control

1) Connect port(3) with Power Code 
2) Connect jack(1) with PTC Micom.
3) Connect USB Cable to the computer 
4) Download Program execution (SAP Configuration) 

* Notice!

Because PTC Download JIG has internal memory, it can
save download files using download program (SAP
Configuration). Push the START button (4) after file saving,
then it execute download. 

(SAP Configuration)

(1) Select HCS12
(2) Target Frequency Settings : 

1) Checking the factor -> Use Specified Target

Frequency…, Unsecure target….

2) Insert Target Bus Frequency -> 7372800

(3) Specify Algorithm: 9S12dt128_128k .12P
(4) Specify S Record: select download file. 
(5) Checking factor: Erase Device, Blank Check Device,

Program Device, Verify Device 

* Notice!

Don’t check other checking boxes. You must follow fig.

(6) Push the ‘Save Image to Cyclone PRO’ button, files

transfer from PC to the Download JIG.

4. Start button

3. Power

1. Connect to Micom port of TV board.

2. Connect to computer.

3

4

 

1

2

5

6