Read JBL GTS 100X User Guide / Operation Manual online
34
Continuous Power Output
35 watts x 2 (4 ohms, 0.05% THD)
(10Hz – 50kHz, 14.4V Battery Voltage, 80kHz filter)
50 watts x 2 (2 ohms, 0.08% THD)
100 watts x 1 (4 ohms, 0.08% THD)
Signal-to-Noise Ratio
100dBA
Frequency Response
10Hz – 50kHz (+0, – 1dB)
20Hz – 20kHz (+0, – 0.1dB)
Damping Factor
>200
Line-Level Input Sensitivity (for rated power)
100mV – 4V RMS (500mV nominal)
Line-Level Input Impedance
10k ohms
Speaker-Level Input Impedance
15 ohms
Speaker-Level Input Sensitivity
200mV – 8V RMS (1V nominal)
Preamp Output Sensitivity
2V out for 4V speaker-level input
Minimum Speaker Impedance
Single Ended, Non-Bridged
2 ohms
Bridged
4 ohms
Built-In Electronic Crossover
80Hz, 18dB per octave low-pass filter
Frequency and Slope
100Hz, 18dB per octave high-pass filter
Power Requirement
11 to 16V DC negative ground
Fuse Size
20 amp ATC-type fuse
Size (L x W x H)
6-5/8" x 9-1/4" x 2" (168.3mm x 235.0mm x 50.8mm)
Weight
4lbs. 3oz. (1.90kg)
Speaker Input / Output Mating
Molex Mini-Fit Jr. # 39-01-2040
Connector
Metal pins: 39-00-0038
Power Mating Connector
Plastic housing: AMP # 1-480700-0
Metal pins for ground &
+
12V: AMP # 350923-3
Metal pins for rem. in: AMP # 350536-1
Specifications
GTS100x OM 7/16/98 2:56 PM Page 34
Click on the first or last page to see other GTS 100X service manuals if exist.