Read JBL GTS 100X User Guide / Operation Manual online
31
L– L+
– +
R– R+
– +
L– L+
– +
R– R+
– +
+
–
Front Outputs
Rear Outputs
Front Satellite
Speakers
Preamp output to preamp input
Rear
Full-Range
Speakers
System 3
Add a Second GTS100x
1 or 2
Subwoofers
GTS100x
GTS100x
L– L+
– +
R– R+
– +
L–
L+
– +
R–
R+
– +
+
–
Front Outputs
Rear Outputs
Front Satellite
Speakers
Preamp output to preamp input
Rear Satellite
Speakers
System 4
Add Power to the Rear
1 or 2
Subwoofers
GTS100x
GTS100x
GTS100x
L– L+
– +
R– R+
– +
L–
L+
– +
R–
R+
– +
+
–
Front Outputs
Rear Outputs
Front Satellite
Speakers
Rear Satellite
Speakers
Preamp output to preamp input
System 5
Add a Second
Subwoofer Amplifier
Subwoofer Amplifier
+
–
Subwoofers
GTS100x
GTS100x
GTS100x
GTS100x
Get more power and system
control by adding a second
GTS100x to power the
main speakers and
subwoofers individually.
Use the built-in crossover
to high-pass the front
speakers and low-pass
the subwoofers.
control by adding a second
GTS100x to power the
main speakers and
subwoofers individually.
Use the built-in crossover
to high-pass the front
speakers and low-pass
the subwoofers.
Next Step:
Add power to the Rear
Full-Range Speakers.
Note: For non-fading bass, also connect the rear-channel head unit
speaker output to the speaker level input of the subwoofer GTS100x.
Add power to the Rear
Full-Range Speakers.
Note: For non-fading bass, also connect the rear-channel head unit
speaker output to the speaker level input of the subwoofer GTS100x.
Add an amp for the rear
speakers for higher volume
capability and more control.
Next Step:
Add more subwoofer power.
speakers for higher volume
capability and more control.
Next Step:
Add more subwoofer power.
For the ultimate in
bass output, add a
second subwoofer
amplifier for a total
system power of
340 watts RMS!
Note the cross-
linking of preamp
inputs for the two
subwoofer amplifiers
to provide
non-fading bass.
Next Step:
Add additional amplifiers in bridge-mode to the front and rear main speakers.
Then add electronic crossovers and biamp front and rear speakers.
bass output, add a
second subwoofer
amplifier for a total
system power of
340 watts RMS!
Note the cross-
linking of preamp
inputs for the two
subwoofer amplifiers
to provide
non-fading bass.
Next Step:
Add additional amplifiers in bridge-mode to the front and rear main speakers.
Then add electronic crossovers and biamp front and rear speakers.
GT
S
10
0
x
CHANNEL POWER AMPLIFIER
GENUINE JBL
HIGH CURRENT 2
/1
MADE IN US
A
GT
S
10
0
x
CHANNEL POWER AMPLIFIER
GENUINE JBL
HIGH CURRENT 2
/1
MADE IN US
A
GT
S
10
0
x
CHANNEL POWER AMPLIFIER
GENUINE JBL
HIGH CURRENT 2
/1
MADE IN US
A
GT
S
10
0
x
CHANNEL POWER AMPLIFIER
GENUINE JBL
HIGH CURRENT 2
/1
MADE IN US
A
GT
S
10
0
x
CHANNEL POWER AMPLIFIER
GENUINE JBL
HIGH CURRENT 2
/1
MADE IN US
A
GT
S
10
0
x
CHANNEL POWER AMPLIFIER
GENUINE JBL
HIGH CURRENT 2
/1
MADE IN US
A
GT
S
10
0
x
CHANNEL POWER AMPLIFIER
GENUINE JBL
HIGH CURRENT 2
/1
MADE IN US
A
GT
S
10
0
x
CHANNEL POWER AMPLIFIER
GENUINE JBL
HIGH CURRENT 2
/1
MADE IN US
A
GT
S
10
0
x
CHANNEL POWER AMPLIFIER
GENUINE JBL
HIGH CURRENT 2
/1
MADE IN US
A
Use the GTS100x in
Simultaneous Stereo +
Mono mode to drive main
speakers with subwoofers.
A passive crossover is
needed for this, as
described on page 22.
Next Step:
Add a second GTS100x to
power subwoofers and
main speakers individually
(see system 3).
Simultaneous Stereo +
Mono mode to drive main
speakers with subwoofers.
A passive crossover is
needed for this, as
described on page 22.
Next Step:
Add a second GTS100x to
power subwoofers and
main speakers individually
(see system 3).
L– L+
– +
R– R+
– +
L–
L+
– +
R–
R+
– +
+
–
Front Outputs
Rear Outputs
Front
Speakers
Rear
Full-Range
Speakers
Subwoofer
System 2B
Add a Subwoofer (Passive)
GTS100x
GT
S
10
0
x
CHANNEL POWER AMPLIFIER
GENUINE JBL
HIGH CURRENT 2
/1
MADE IN US
A
GTS100x OM 7/16/98 2:56 PM Page 31
Click on the first or last page to see other GTS 100X service manuals if exist.