VOYAGER - JBL Audio EMC - CB Certificate (repair manual). Page 43

Read JBL VOYAGER EMC - CB Certificate online

Report No.: EM201300534-1                       Application No.:
 
ZJ00032799                   Page 43 of 56 
 
4.6 MEDIUM ACCESS PROTOCOL 
4.6.1 DEFINITION 
EN 300 328 V1.7.1 4.5.3: A medium access protocol is a mechanism designed to facilitate 
spectrum sharing with other devices in a wireless network. 
4.6.2 REQUIREMENT 
A medium access protocol shall be implemented by the equipment. 
On the basis of the latest list of harmonized standards under the R&TTE Directive 1999/5/EC 
which was published on October 23, 2012 in Official Journal C321 contains the following 
(mandatory) guidance: The  efficiency  of  the  various  sharing  mechanisms  can  be  assessed  
using  the  appropriate  clauses  of  EN  300328 version  1.8.1.” 
In addition, this requirement does not apply for equipment with a maximum declared RF 
Output power level of less than 10 dBm e.i.r.p. or for equipment when operating in a mode 
where the RF Output power is less than 10 dBm e.i.r.p. 
Adaptive Frequency Hopping equipment is allowed to operate in a non-adaptive mode 
providing it complies with the requirements applicable to non-adaptive frequency hopping 
equipment. 
Adaptive Frequency Hopping equipment is allowed to have Short Control Signalling 
Transmissions (e.g. ACK/NACK signals, etc.) without sensing the frequency for the presence 
of other signals. See clause 4.3.1.6.3. 
Adaptive Frequency Hopping (AFH) equipment uses a Detect And Avoid (DAA) mechanism 
which allows an equipment to adapt to its environment by identifying frequencies that are 
being used by other equipment. 
Adaptive Frequency Hopping systems shall implement either of the DAA mechanisms 
provided in clauses 4.3.1.6.1 or 4.3.1.6.2. 
4.6.3 FREQUENCY HOPPING SYSTEM 
This transmitter device is frequency hopping device, and complies with EN 300 328 4.3.5 
standard. 
This device uses Bluetooth radio which operates in 2400~2483.5MHz band. Bluetooth uses a 
radio technology called frequency-hopping spread spectrum, which chops up the data being 
sent and transmits chunks of it on up to 79 bands(1MHz each; centered from 2402~2480MHz) 
in the range 2400~2483.5MHz. The transmitter switches hop frequencies 1600 times per 
second to assure a high degree of data security. All Bluetooth devices participating in a given 
Page of 56
Display

Click on the first or last page to see other VOYAGER service manuals if exist.