TC1000 (serv.man6) - JBL Audio User Guide / Operation Manual. Page 8

6

2 Insert the batteries making sure that you

properly orient them for polarity,
pointing the positive (+) end towards
the “key,” and the negative (–) end
towards the spring.

3 Close the battery compartment cover.

Note When replacing batteries, it is recommend-
ed that all four be replaced at the same time. To
avoid damage, it is recommended that the
batteries be removed if the TC1000 will not be
used for more than a month.

After installing the batteries, you should
see a “Welcome” display on the 
touchscreen. 

If you do not see a display:

• Ensure that you’ve installed fresh

batteries, correctly oriented in the
battery compartment.

Note See “Battery Safety Precautions,” page
28, for additional information on proper handling
and disposal of batteries.

Starting Take Control for the first time 
requires two steps:

1 Installing the batteries.

2 Completing the Setup Wizard.

Installing the batteries provides power and
enables you to begin using Take Control.
You must install four AA-size batteries for
Take Control to work. We recommend
alkaline batteries, and include four in the
box. You may use either disposable or
rechargeable alkaline batteries. Other types
of batteries will work, but won’t last as
long.

To insert the batteries:

1 Turn Take Control upside down (with

the touchscreen toward the floor), and
remove the door to the battery com-
partment by pulling the tab located on
the top of the cover.