TC1000 (serv.man6) - JBL Audio User Guide / Operation Manual. Page 6

4

Computer-Connector Port – The com-
puter-connector port is used to establish a
serial connection between the TC1000 and
a compatible computer. This connection
enables your TC1000 to transfer data to
your computer, and vice versa. You can use
the computer-connector port by simply
following the instructions in “Setting Up
Take Control with a Computer,” 
page 14. 

IR Transmitter – The infrared (IR) transmit-
ter sends an IR signal to your devices,
directing them to perform an action, such
as changing channels or volume level.
When using your TC1000, you need to
point the IR Transmitter toward the 
applicable device, and be within 23 feet
(7.0 m) for it to receive the IR signal.

Battery Compartment – The battery
compartment houses four AA alkaline bat-
teries. For more information on 
installing and replacing the batteries, see
the instructions in “Installing the Batter-
ies,” page 6.

Reset Button – You can use the reset but-
ton, located inside the battery compart-
ment, to return the contrast, speaker, and
time to their predefined default settings.
Pressing the reset button will not change
or delete learned IR codes, activities,
macros, or any customizing of buttons
performed through the Take Control Editor
on your computer.

To use the reset button: 

1 Remove the cover to the battery 

compartment.

2 Using a paper clip, press the reset 

button.