Read JBL SUB 180 EMC - CB Certificate online
page 13 of 28
Ref.No.: 410586
IEC 60065
Cl.
Requirement - Test
Result - Remark
Verdict
TRF No.: I60065__C
14.6.6
Manually operated mechanical switches (MOMS)
separately approved to IEC 61058-1
separately approved to IEC 61058-1
Mains switch SW501
P
Manually operated mechanical switch (MOMS)
tested as part of the equipment complies with
14.6.7, 14.6.10 and 20.1.4 and meets 14.6.8
and/or 14.6.9 and Annex G (G1.1)
tested as part of the equipment complies with
14.6.7, 14.6.10 and 20.1.4 and meets 14.6.8
and/or 14.6.9 and Annex G (G1.1)
Marked:16(4)A. Measured
current consumption:0.2A.
Calculated peak surge
current:18A(measured:15A)
current consumption:0.2A.
Calculated peak surge
current:18A(measured:15A)
P
14.7
Safety interlocks
Safety interlocks to 2.8 of IEC 60950
N
14.8
Voltage setting devices
Voltage setting device not likely to be changed
accidentally
accidentally
N
14.9
Motors
14.9.1
Endurance test on motors
N
Motor
start
test
N
Dielectric
strength
test
N
14.9.2
Not adversely affected by oil or grease etc.
N
14.9.3
Protection against moving parts
N
14.9.4
Motors with phase-shifting capacitors, three-phase
motors and series motors meet Cl. B.8, B.9 and
B.10 of IEC 60950, Annex B
motors and series motors meet Cl. B.8, B.9 and
B.10 of IEC 60950, Annex B
N
14.10
Batteries
14.10.1
Batteries mounted with no risk of accumulation of
flammable gases
flammable gases
N
14.10.2
No possibility of recharging non-rechargeable
batteries
batteries
N
14.10.3
Recharging currents and times within
manufacturers limits
manufacturers limits
N
Lithium batteries discharge and reverse currents
within the manufacturers limits
within the manufacturers limits
N
14.11
Optocouplers
Optocouplers comply with Cl. 8
N
N
Click on the first or last page to see other SUB 180 service manuals if exist.