Read JBL SOUNDFLY AIR EMC - CB Certificate online
Page 3 of 38
Report No. : 12-1330-0044
TRF No. IEC60065K
Summary of testing:
Tests performed (name of test and test clause):
All applicable tests as described in Test Case were
performed.
Specified maximum ambient temperature is
performed.
Specified maximum ambient temperature is
+45°C.
A sinusoidal waveform signal based on a
geometric mean-frequency of 1000 Hz was
applied to the input terminals of a EUT and
operated continuously which is the Highest load
for this equipment
applied to the input terminals of a EUT and
operated continuously which is the Highest load
for this equipment
The speakers were supplied by internal power
adaptor which provides voltage below 50Vdc
and there is voltage generating circuit in the
speakers. Therefore,
and there is voltage generating circuit in the
speakers. Therefore,
It’s considered that there is
no potential ignition source within the speakers.
The test samples were pre-production sample
without serial numbers.
Testing location:
Unless otherwise indicated, all tests were performed
at the location stated in “Testing procedure and
testing location”.
at the location stated in “Testing procedure and
testing location”.
Summary of compliance with National Differences
List of countries addressed:
EU Group Differences, EU Special National Conditions, EU A-Deviations, CA, KR
Explanation of used codes: CA=Canada, KR=Korea
For National Differences see corresponding Attachment.
For National Differences see corresponding Attachment.
The product fulfils the requirements of IEC 60065:2001 (Seventh Edition) + A1:2005 + A2:2010
and EN 60065:2002 + A1:2006 + A11:2008 + A2:2010 + A12:2011
Click on the first or last page to see other SOUNDFLY AIR service manuals if exist.