SB 200 (serv.man3) - JBL Audio EMC - CB Certificate (repair manual). Page 15

Page 15 of 70 

Report No.: 350-120155AX 

 
  

 

 

 

 

 

Clause 

Requirement + Test 

Result - Remark 

Verdict

 

TRF No. IEC60065K 

14.4 

High voltage components  

Not provided. 

N/A 

 

High-voltage components and assemblies: U > 4 kV 
(peak) separately approved  

 N/A 

 

Component meets category V-1 of IEC 60707  

 

N/A 

14.4.1 

High voltage transformers and multipliers tested as 
part of the submission  

 N/A 

14.4.2 

High voltage assemblies and other parts tested as 
part of the submission  

 N/A 

14.5 

Protective devices  

See appended table of CL.14, 
Primary Fuse: F501. 

Pass 

 

Protective devices used within their ratings  

See appended table of CL.13.

Pass 

 

External clearances and creepage distances meet 
requirement of clause 13 for the voltage across the 
device when opened  

See appended table of CL.13.

Pass 

14.5.1.1 

a) Thermal cut-outs separately approved  

Not provided. 

N/A 

 

b) Thermal cut-outs tested as part of the submission  

N/A 

14.5.1.2 

a) Thermal links separately approved  

Not provided. 

N/A 

 

b) Thermal links tested as part of the submission  

 

N/A 

14.5.1.3 

Thermal devices re-settable by soldering  

Not provided. 

N/A 

14.5.2.1 

Fuse-links in the mains circuit according to IEC 
60127  

See appended table of CL.14.

Pass 

14.5.2.2 

Correct marking of fuse-links adjacent to holder  ...: 

F501: T3.15AL250V. 

Pass 

14.5.2.3 

Not possible to connect fuses in parallel ................: 

 

Pass 

14.5.2.4 

Not possible to touch hazardous live parts when 
replacing fuse-links without the use of a tool  .........: 

Not possible to replace the 
fuse without a tool. 

Pass 

14.5.3 

PTC thermistors comply with IEC 60730-1:2007 

Not provided. 

N/A 

 

PTC devices (15 W) category V-1 or better  

 

N/A 

14.5.4 Circuit 

protectors 

have adequate breaking capacity 

and their position is correctly marked  

 N/A 

14.6 

Switches  

See appended table of CL.14.

Pass 

14.6.1 a) 

Separate testing to IEC 61058-1 including: 
- 10 000 operations 
- Normal pollution suitability 
- Make and break speed independent of speed of 
  actuation 
V-0 compliance with annex G, G.1.1  

Certified power switch 
provided, complies with the 
requirements and 
characteristics.  
(See appended table 14) 

Pass 

14.6.1 b) 

Tested in the apparatus: 

 

N/A 

 

Switch controlling > 0.2A with open contact  voltage
 > 35 V (peak)/24 V dc complying with 14.6.3, 14.6.4 
and V-0 in annex G, G.1.1  

 N/A 

 

Switch controlling > 0.2A with open contact  voltage 
< 35 V (peak)/24 V dc complying with 14.6.3 and V-0 
in annex G, G.1.1  

 N/A