SB 100 (serv.man3) - JBL Audio EMC - CB Certificate (repair manual). Page 67

Page 67 of 68 

Report No.: 350-120154AX 

 
  

 

 

 

 

 

Clause 

Requirement + Test 

Result - Remark 

Verdict

 

TRF No. IEC60065K 

16.1 

Add the following paragraph after the third 
paragraph. 
An external earth wire of Class 0I equipment shall 
be green/yellow, and the length of external earth 
wire of plug with an external earth wire shall be 
equal or more than 10 cm from the plug. 

 N/A 

16.2 

Replace the first paragraph by the following. 
Power supply cord conductors complied with JIS C 
3662 (corresponding to IEC 60227) or JIS C 3663 
(corresponding to IEC 60245) shall have a nominal 
cross-sectional area not less than those shown in 
table 18. If power supply cord conductors comply 
with other standards, it shall comply with relevant 
wiring requirements. 

See appended table CL.14.

Pass 

Replace Table 18 by the following. 

 

 

 

 

RATED CURRENT 

CONSUMPTION of the 

apparatus 

a

 

A 

Nominal cross-

sectional area 

 

mm

2

 

 

up to and including 6 
Over 6 up to and 
including 10 
Over 10 up to and 
including 16 

0,75 

1 

 

1,5 

 

a

 The RATED CURRENT CONSUMPTION 

includes currents which can be drawn from the 
socket-outlets providing MAINS power for other 
apparatus. 

16.2 

 

 

 

See appended table CL.14.

Pass 

16.3 

In item a), replace IEC 60885-1 by JIS C 3661-
1:1998. 

 N/A 

 

In item b), replace IEC 60227-2 by JIS C 3662-2 
(corresponding to IEC 60227-2). 

 N/A 

16.5 

Add “or CLASS 0I EQUIPMENT used a plug with 
an external earth wire” after the words, CLASS I 
EQUIPMENT. 

 N/A 

20.1 

In Note 3, replace each IEC 60065 and IEC 60707 
by “JIS C 6065” and “JIS C 0066:2001 (IEC 
60707). 

 N/A 

Annex B 

Replace normative by Informative. 

 

N/A 

Annex G 

Replace IEC 60707 by JIS C 0066:2001 
Replace IEC 60695-2-2 by JIS C 60695-2-2:2000.
Replace IEC 60695-11-10 by JIS Z 2391:1999. 

 Pass 

Annex N 

Add “- protective earthing lead wire, protective 
earthing contact of appliance inlet or external 
protective earthing terminal in case of Class 0I 
apparatus.” after the second dash of N.1.3. 

 N/A