Read JBL RADIAL (serv.man7) User Guide / Operation Manual online
9
950-0113-001
JBL
®
Radial Manual
SPECIFICATIONS
Manufacturer Harman
Manufacturer Harman
Multimedia
Model
JBL
Radial
Driver (Full Range)
Hercules 45mm
Drivers (Tweeter)
Odyssey 25mm
Power
1 x 30 watts (woofer),
2 x 15 watts (tweeters), at 1% THD
Dimensions
Width:
Width:
12.0 inches 305mm
Depth:
5.25 inches 135mm
Height:
10.5 inches 270mm
Input Impedance
>10k Ohm
Signal-to-Noise ratio
>85dB
Frequency Response
70 – 20 kHz
Input Sensitivity
250 mV rms for rated power output
USA/Canada Power
120 volts, 60Hz AC
220-230 volts, 50 or 60 Hz AC
Japan
100 volts, 50 or 60 Hz AC
Australia
240 volts, 50 or 60 Hz AC
Maximum Power Consumption
55 watts
UL/CUL/CE Approved
SYMPTOM
POSSIBLE PROBLEM
SOLUTION
NOTE
CHARGING SYNCING
iPod will not charge
Wrong adaptor is used.
Ensure correct adaptor is
used for your specifi c iPod
model.
used for your specifi c iPod
model.
The iPod is not making full
contact with the dock station.
contact with the dock station.
Ensure iPod is seated
securely into the docking
station.
securely into the docking
station.
iPod is not recognized by the
computer when docked into
the JBL Radial or there is an
error in data transfer.
computer when docked into
the JBL Radial or there is an
error in data transfer.
Third party accessories may
be confl icting with the USB or
fi rwire signal.
be confl icting with the USB or
fi rwire signal.
Make sure you do not have
the JBL Radial connected to a
USB or fi rewire hub.
the JBL Radial connected to a
USB or fi rewire hub.
Connect the JBL Radial
directly into the computers
USB or fi rewire port.
directly into the computers
USB or fi rewire port.
USB or fi rewire port is not
supplying enough power
supplying enough power
Try connecting the USB or
fi rewire cable to another port
on the back of the computer.
fi rewire cable to another port
on the back of the computer.
Click on the first or last page to see other RADIAL (serv.man7) service manuals if exist.