Read JBL ON TOUR (serv.man6) EMC - CB Certificate online
- Page 3 of 17 -
Order No. 23172
SUMMARY OF TESTING :
Sub-clause
Information/Remarks
Comments
1.2.02.01
Normal load as described in Annex L or as close
as possible to the most severe normal use
as possible to the most severe normal use
Normal operation is considered 1/8
th
of maximum
undistorted. Non-clipping was determined using a
1 KHz sinusoidal signal input. For maximum
normal operation, 1/8
1 KHz sinusoidal signal input. For maximum
normal operation, 1/8
th
of the non-clipping
amplitude was used with a filtered pink noise input
signal.
signal.
1.7.1
Required markings regarding supply.
Class III Equipment with an enclosure made of
HB-Material, using a non-special connector for the
DC input must have a marking stating the
manufacturer and model number of the power
supply to be used.
HB-Material, using a non-special connector for the
DC input must have a marking stating the
manufacturer and model number of the power
supply to be used.
1.7.14
Language of safety markings /instruction.
Instructions and equipment marking related to
safety shall be applied in a language, which is
acceptable in the country in which the equipment
is to be sold.
safety shall be applied in a language, which is
acceptable in the country in which the equipment
is to be sold.
3.2
Connection to the supply.
Unit is powered by a limited power source
complying with Sub-clause 2.11. Connection is
made by a detachable power supply cord with a
non-special type connector. The external power
supply was not evaluated in this test report.
complying with Sub-clause 2.11. Connection is
made by a detachable power supply cord with a
non-special type connector. The external power
supply was not evaluated in this test report.
Click on the first or last page to see other ON TOUR (serv.man6) service manuals if exist.