ON STAGE (serv.man3) - JBL Audio EMC - CB Certificate (repair manual). Page 32

- Page 3 of 7 - 

 

 

 

 

Order No.  23171 

 

 

4.3.6 

Replace the third paragraph with the following 
variation: 

Equipment with a plug portion, suitable for 
insertion into a 10 A 3-pin flat-pin socket-outlet 
complying with AS/NZS 3112, shall comply with 
the requirements in AS/NZS 3112 for 
equipment with integral pins for insertion into 
socket-outlets.  

Class III equipment.  

4.3.13 

After the third paragraph insert the following 
variation: 

NOTE - For the purpose of this standard compliance 
with AS/NZS 2211.1 is deemed to be compliance with 
IEC 60825.1. 

Class III equipment.  

4.7 

Add After Clause 4.7 the following variation: 

For alternative tests refer to Annex YY. 

Class III equipment. 

6.2.1 

Add the new following variation:  

Delete item c) and replace with the following: 

c) An SELV CIRCUIT, a TNV-2 CIRCUIT or a 
LIMITED CURRENT CIRCUIT provided for 
connection of other equipment.  The 
requirement for separation applies whether or 
not this circuit is accessible. 

Considered. 

6.2.2 

Replace the first paragraph with the following 
variation: 

In Australia (this variation does not apply in 
New Zealand), compliance with 6.2.2 is 
checked by the tests of both 6.2.2.1 and 
6.2.2.2. 

Class III equipment.