Read JBL ON BEAT EMC - CB Certificate online
Page 8 of 39
Report Ref. No. 086-2101101501-000
TRF No.: IEC/EN60950_1c
1.7.8
Controls and indicators
No such controls
N/A
1.7.8.1
Identification, location and marking ................... :
N/A
1.7.8.2
Colours ............................................................. :
N/A
1.7.8.3
Symbols according to IEC 60417 ........................ :
N/A
1.7.8.4
Markings using figures ...................................... :
N/A
1.7.9
Isolation of multiple power sources .................... :
Class III equipment.
N/A
1.7.10
Thermostats and other regulating devices ......... :
Class III equipment.
N/A
1.7.11
Durability
Markings legible after test
P
1.7.12
Removable parts
No marking on the
removable parts
removable parts
P
1.7.13
Replaceable batteries ........................................ :
No such battery
N/A
Language(s) ...................................................... :
1.7.14
Equipment for restricted access locations ........... :
No for restricted access
location.
location.
N/A
2
PROTECTION FROM HAZARDS
P
2.1
Protection from electric shock and energy hazards
P
2.1.1
Protection in operator access areas
See below
P
2.1.1.1
Access to energized parts
Class III equipment, SELV
circuit only.
circuit only.
N/A
Test by inspection ............................................... :
N/A
Test with test finger (Figure 2A) .......................... :
N/A
Test with test pin (Figure 2B) .............................. :
N/A
Test with test probe (Figure 2C) .......................... :
N/A
2.1.1.2
Battery compartments
N/A
2.1.1.3
Access to ELV wiring
Class III equipment, SELV
circuit only.
circuit only.
N/A
Working voltage (Vpeak or Vrms); minimum
distance through insulation (mm)
distance through insulation (mm)
2.1.1.4
Access to hazardous voltage circuit wiring
Class III equipment, SELV
circuit only.
circuit only.
N/A
2.1.1.5
Energy hazards .................................................. : Class III equipment. The
unit should be supplied by
external AC/DC adaptor
complied with Clause 2.5
limited power sources
requirements.
external AC/DC adaptor
complied with Clause 2.5
limited power sources
requirements.
N/A
2.1.1.6
Manual controls
Class III equipment, SELV
circuit only.
circuit only.
N/A
2.1.1.7
Discharge of capacitors in equipment
Class III equipment, SELV
circuit only.
circuit only.
N/A
Measured voltage (V); time-constant (s) .............. :
Click on the first or last page to see other ON BEAT service manuals if exist.