Read JBL ON BEAT EMC - CB Certificate online
Page 18 of 39
Report Ref. No. 086-2101101501-000
TRF No.: IEC/EN60950_1c
4.3.10
Dust, powders, liquids and gases
The equipment does not
generate ionizing radiation
or use a laser, and does not
contain flammable liquids or
gases.
generate ionizing radiation
or use a laser, and does not
contain flammable liquids or
gases.
N/A
4.3.11
Containers for liquids or gases
No containers for liquids or
gases in the equipment.
gases in the equipment.
N/A
4.3.12
Flammable liquids ............................................. : The equipment does not
contain flammable liquid.
N/A
Quantity of liquid (l) ........................................... :
—
Flash point ( C) ................................................. :
—
4.3.13
Radiation
No ionizing radiation, laser
or flammable gases
presents.
or flammable gases
presents.
N/A
4.3.13.1
General
N/A
4.3.13.2
Ionizing radiation
N/A
Measured radiation (pA/kg) ................................ :
Measured high-voltage (kV) ............................... :
Measured focus voltage (kV) ............................. :
CRT markings ................................................... :
4.3.13.3
Effect of ultraviolet (UV) radiation on materials
N/A
Part, property, retention after test, flammability
classification ...................................................... :
classification ...................................................... :
N/A
4.3.13.4
Human exposure to ultraviolet (UV) radiation .... :
N/A
4.3.13.5
Laser (including LEDs)
N/A
Laser class ........................................................ :
4.3.13.6
Other types ........................................................ :
N/A
4.4
Protection against hazardous moving parts
N/A
4.4.1
General
No hazardous moving parts
N/A
4.4.2
Protection in operator access areas ................... :
N/A
4.4.3
Protection in restricted access locations ............ :
N/A
4.4.4
Protection in service access areas
N/A
4.5
Thermal requirements
P
4.5.1
General
No exceeding temperature.
P
4.5.2
Temperature tests
(see appended table 4.5).
P
Normal load condition per Annex L .................... :
4.5.3
Temperature limits for materials
(see appended table 4.5)
P
4.5.4
Touch temperature limits
(see appended table 4.5)
P
Click on the first or last page to see other ON BEAT service manuals if exist.