Read JBL ON BEAT XTREME Service Manual online
6
Bluetooth pairiNg
Before you can use your JBL OnBeat Xtreme system with a Bluetooth-
Before you can use your JBL OnBeat Xtreme system with a Bluetooth-
enabled device, you must pair it with that device.
Note: The maximum distance for Bluetooth functionality is approximately
30 feet.
To pair the JBL OnBeat Xtreme system with your device:
1. Make sure your JBL OnBeat Xtreme system is turned on (the Power
LED glows white).
2. Confirm that the JBL OnBeat Xtreme is in the Bluetooth pairing mode
(the Source Select button LED will be flashing blue). If the LED is not
flashing blue, press the Source Select button repeatedly until its LED
begins to flash blue.
3. Put your Bluetooth-enabled device in Pairing mode so both devices
can “see” each other. (Refer to the Bluetooth-enabled device’s user’s
guide for directions and details about putting it into Pairing mode.) The
JBL OnBeat Xtreme unit will be represented as “OnBeat XT” on your
Bluetooth-enabled device.
4. If prompted by your device, enter the JBL OnBeat Xtreme password,
which is
0000.
5. The JBL OnBeat Xtreme system is successfully paired and ready to
use when the Source Select button stops flashing and glows blue. The
JBL OnBeat Xtreme will remain paired with the Bluetooth device even
if you change the source or put the unit into the Sleep mode.
Note: Bluetooth pairing between two devices does not have to
be repeated after a successful initial pairing unless the JBL OnBeat
Xtreme system has been removed from the Bluetooth-enabled device’s
Bluetooth device list or the JBL OnBeat Xtreme’s power cord has
been disconnected. While the JBL OnBeat Xtreme is in the Bluetooth-
connected mode you can force the unit into the Bluetooth pairing mode
by pressing the Source Select button for at least two seconds. (the
Source Select Button LED will flash blue).
listeNiNg to musiC From a Bluetooth-eNabled deviCe
1. Make sure the JBL OnBeat Xtreme system is paired with your
1. Make sure the JBL OnBeat Xtreme system is paired with your
Bluetooth-enabled device (see Bluetooth Pairing, at left).
2. Place the JBL OnBeat Xtreme system into the Bluetooth source mode
by pressing the Source Select button repeatedly until its LED glows
blue.
3. Go to the Bluetooth-enabled device’s music player and play music.
Refer to the Bluetooth-enabled device’s user’s guide for directions
and details about using its music player and transmitting music via
Bluetooth technology.
4. Use the Bluetooth-enabled device to navigate the music player.
JBL
OnBeat Xtreme service manual
Page 8 of 33
Click on the first or last page to see other ON BEAT XTREME service manuals if exist.