ON BEAT MINI - JBL Audio EMC - CB Certificate (repair manual). Page 59

 

 

Page 14 of 16 

Report No.: W13-950-006  

IEC60950_1B - ATTACHMENT 

Clause 

Requirement + Test 

Result - Remark 

Verdict

 

3.2.1.1 

In Ireland, apparatus which is fitted with a flexible 
cable or cord and is designed to be connected to 
a mains socket conforming to I.S. 411 by means 
of that flexible cable or cord and plug, shall be 
fitted with a 13 A plug in accordance with 
Statutory Instrument 525:1997 - National 
Standards Authority of Ireland (section 28) (13 A 
Plugs and Conversion Adaptors for Domestic 
Use) Regulations 1997. 

 N/A 

3.2.4 

In Switzerland, for requirements see 3.2.1.1 of 
this annex. 

 N/A 

3.2.5.1 

In the United Kingdom, a power supply cord with 
conductor of 1,25 mm2 is allowed for equipment 
with a rated current over 10 A and up to and 
including 13 A. 

 N/A 

3.3.4 

In the United Kingdom, the range of conductor 
sizes of flexible cords to be accepted by terminals 
for equipment with a RATED CURRENT of over 
10 A up to and including 13 A is: 
• 1,25 mm

2

 to 1,5 mm

2

 nominal cross-sectional 

area. 

 N/A 

4.3.6 

In the United Kingdom, the torque test is 
performed using a socket outlet complying with 
BS 1363 part 1:1995, including Amendment 
1:1997 and Amendment 2:2003 and the plug part 
of DIRECT PLUG-IN EQUIPMENT shall be 
assessed to BS 1363: Part 1, 12.1, 12.2, 12.3, 
12.9, 12.11, 12.12, 12.13, 12.16 and 12.17, 
except that the test of 12.17 is performed at not 
less than 125 °C. Where the metal earth pin is 
replaced by an Insulated Shutter Opening Device 
(ISOD), the requirements of clauses 22.2 and 23 
also apply. 

 N/A 

4.3.6 

In Ireland, DIRECT PLUG-IN EQUIPMENT is 
known as plug similar devices. Such devices shall 
comply with Statutory Instrument 526:1997 - 
National Standards Authority of Ireland (Section 
28) (Electrical plugs, plug similar devices and 
sockets for domestic use) Regulations, 1997. 

 N/A