ON BEAT MINI - JBL Audio EMC - CB Certificate (repair manual). Page 54

 

 

Page 9 of 16 

Report No.: W13-950-006  

IEC60950_1B - ATTACHMENT 

Clause 

Requirement + Test 

Result - Remark 

Verdict

 

3.3.4 

In Table 3D, delete the fourth line: conductor 
sizes for 10 to 13 A, and replace with the 
following: 
Over 10 up to and including 16 | 1,5 to 2,5 | 1,5 to 
4  

| 

Delete the fifth line: conductor sizes for 13 to 16 A

 N/A 

4.3.13.6 

(A1:2010)

 

Replace the existing NOTE by the following: 

NOTE Z1 Attention is drawn to: 
1999/519/EC: Council Recommendation on the 
limitation of exposure of the general public to 
electromagnetic fields 0 Hz to 300 GHz, and 
2006/25/EC: Directive on the minimum health and 
safety requirements regarding the exposure of workers 
to risks arising from physical agents (artifical optical 
radiation). 

 N/A 

 

Standards taking into account mentioned 
Recommendation and Directive which demonstrate 
compliance with the applicable EU Directive are 
indicated in the OJEC.

 

 N/A 

Annex H 

Replace the last paragraph of this annex by: 
At any point 10 cm from the surface of the 
OPERATOR ACCESS AREA, the dose rate shall 
not exceed 1 μSv/h (0,1 mR/h) (see NOTE). 
Account is taken of the background level. 
Replace the notes as follows: 

NOTE These values appear in Directive 
96/29/Euratom. 

Delete NOTE 2. 

 N/A 

Bibliography 

Additional EN standards. 

 

 

 

 

 

1.2.4.1 In 

, certain types of Class I appliances 

(see 3.2.1.1) may be provided with a plug not 
establishing earthing conditions when inserted 
into Danish socket-outlets. 

 N/A 

1.2.13.14 In 

and Sweden, for requirements see 

1.7.2.1 and 7.3 of this annex. 

 N/A 

1.5.7.1 In 

and Sweden, resistors 

bridging 

BASIC INSULATION 

in 

CLASS I PLUGGABLE 

EQUIPMENT TYPE A 

must comply with the 

requirements in 1.5.7.1. In addition when a single 
resistor is used, the resistor must withstand the 
resistor test in 1.5.7.2. 

 N/A